Solaris

Hello,

I have a T3 array connected to a V880 running Solaris 9.

There are two volumes currently configured: v1 and v2.

There are two file systems on the box: /a1 and /a2.

I'm getting ready to re-build volume v1 to add a hot spare. But because I did not set the array up originally I want to find out what mount point is mapped to v1 on the array. I can assume /a1 maps to v1 and /a2 maps to v2, but assumptions can be dangerous.

How do I determine which /dev/rdsk driver points to which volume on the array?

Thanks.

Here are the entries in /etc/vfstab:

/dev/dsk/c2t1d0s6 /dev/rdsk/c2t1d0s6 /a1 ufs 1 yes nologging
/dev/dsk/c3t2d1s6 /dev/rdsk/c3t2d1s6 /a2 ufs 1 yes nologging

You can manually mount the raw device on a temp dir and check if its the mount point that you want to use.