Solaris

One thing I want to tell you that DNS was not selected for name resolution when Solaris was installed.

Sorry for that,now I am sending the correct info--

# cat /etc/nsswitch.conf
#
# /etc/nsswitch.files:
#
# An example file that could be copied over to /etc/nsswitch.conf; it
# does not use any naming service.
#
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.

passwd: files
group: files
hosts: files
ipnodes: files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
# At present there isn't a 'files' backend for netgroup; the system will
# figure it out pretty quickly, and won't use netgroups at all.
netgroup: files
automount: files
aliases: files
services: files
sendmailvars: files
printers: user files

auth_attr: files
prof_attr: files
project: files

# cat /etc/resolv.conf
cat: cannot open /etc/resolv.conf

# cat /etc/defaultrouter
cat: cannot open /etc/defaultrouter

No Idea,Why is your own IP listed as the default gateway.
Hpw can i config the other IP as default gateway ??

of course .. create /etc/defaultrouter file and add your gateway on your network
this is for permanently .. manually add with route command ..

route delete default 10.130.92.27
route add default your_gw

I deleted the default router(10.130.92.27) and try to add the new router but it is saying--

# route add default 142.102.100.60
add net default: gateway 142.102.100.60: Network is unreachable

I am also sending the o/p of netstat which shows 10.130.92.27 had been deleted as default router

# netstat -nr

Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
10.130.92.0 10.130.92.27 U 1 14 eri0
224.0.0.0 10.130.92.27 U 1 0 eri0
127.0.0.1 127.0.0.1 UH 28 264544 lo0


my main problem is that i am unable to reach the n/w.So please tell me How can I do that??

Oh dear .. dont u see that u have no gateway from your subnet to another ..firstly u must assign default gateway ..from which you can reach to another (of course if there is any way) .. ask to your admin what is default gateway of your net ..

Presumably there is a gateway on the 10.130.92.x network which knows how to connect to 142.102.100.60 so you should use that as your gateway. I suppose you could put in an explicit route to 142.102.100.60 but we don't know how you are wired, so we cannot hope to guess how exactly. (Presumably on eri0 so you could try to add a route to that address on that interface and see if it helps, but I suspect it won't.)

What was the solution then?