Problem Please help...


 
Thread Tools Search this Thread
Operating Systems Solaris Problem Please help...
# 1  
Old 07-26-2008
Problem Please help...

Hi all,
I have installed two v210 servers with external disk arrays and on both of them when i run the fsck i get the following output :


/dev/md/dsk/d0 IS CURRENTLY MOUNTED READ/WRITE.
CONTINUE? yes
** /dev/md/dsk/d0
** Currently Mounted on /
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3a - Check Connectivity
** Phase 3b - Verify Shadows/ACLs
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cylinder Groups
FILESYSTEM MAY STILL BE INCONSISTENT.
91493 files, 2064652 used, 10320272 free (72136 frags, 1281017 blocks, 0.6% fragmentation)
***** FILE SYSTEM IS BAD *****
***** PLEASE RERUN FSCK *****
/dev/md/dsk/d2 IS CURRENTLY MOUNTED READ/WRITE.
CONTINUE? yes
** /dev/md/dsk/d2
** Currently Mounted on /EMS
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3a - Check Connectivity
** Phase 3b - Verify Shadows/ACLs
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cylinder Groups
FILESYSTEM MAY STILL BE INCONSISTENT.
3556 files, 2398851 used, 24554204 free (404 frags, 3069225 blocks, 0.0% fragmentation)
***** FILE SYSTEM IS BAD *****
***** PLEASE RERUN FSCK *****
/dev/md/dsk/d3 IS CURRENTLY MOUNTED READ/WRITE.
CONTINUE? yes
** /dev/md/dsk/d3
** Currently Mounted on /EMS2
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3a - Check Connectivity
** Phase 3b - Verify Shadows/ACLs
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cylinder Groups
FILESYSTEM MAY STILL BE INCONSISTENT.
2 files, 9 used, 26953046 free (14 frags, 3369129 blocks, 0.0% fragmentation)
***** FILE SYSTEM IS BAD *****
***** PLEASE RERUN FSCK *****
/dev/dsk/c2t0d0s0 IS CURRENTLY MOUNTED READ/WRITE.
CONTINUE? yes
** /dev/dsk/c2t0d0s0
** Currently Mounted on /backup_DB0
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3a - Check Connectivity
** Phase 3b - Verify Shadows/ACLs
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cylinder Groups
FILESYSTEM MAY STILL BE INCONSISTENT.
26 files, 11364155 used, 65268693 free (13 frags, 8158585 blocks, 0.0% fragmentation)
***** FILE SYSTEM IS BAD *****
***** PLEASE RERUN FSCK *****
/dev/dsk/c2t0d0s1 IS CURRENTLY MOUNTED READ/WRITE.
CONTINUE? yes
** /dev/dsk/c2t0d0s1
** Currently Mounted on /backup_DB1
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3a - Check Connectivity
** Phase 3b - Verify Shadows/ACLs
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cylinder Groups
FILESYSTEM MAY STILL BE INCONSISTENT.
12 files, 6884716 used, 69748132 free (12 frags, 8718515 blocks, 0.0% fragmentation)
***** FILE SYSTEM IS BAD *****
***** PLEASE RERUN FSCK *****



What sould i do ?

Thanks!
Yuval
# 2  
Old 07-26-2008
boot from network or cd/dvd and check the internal disks again...
# 3  
Old 07-26-2008
Computer

Boot the system from cd/dvd to single user.
Then, run fsck.
fsck -F ufs -y /dev/dsk/c#c#t#s0
and so on for other slices.
Make sure when you re-run the fsck the 2nd or 3rd time, its not giving similar errors or corrupted. instead it should pass through cleanly. Once done, halt the system by doing a sync and init 0. from ok> prompt boot the system normally
# 4  
Old 07-26-2008
And beware, if your disks are mirrored, PLS detach them first and do filesystem check on them individually. You might not know, if there's a corruption from one disk might be syncing to the other as well.
# 5  
Old 07-26-2008
Thanks i will try it.

Thank you !!!
# 6  
Old 07-26-2008
What did you mean doing a SYNC

Is it a command that i should run?

Is there any difference if i will boot to Single user driirectly from the ok promt (boot -s)?

Yuval

Last edited by yuvalmol; 07-26-2008 at 11:26 AM..
# 7  
Old 07-26-2008
I remember seeing output like that. I found a patch for fsck and that fixed it. So that is my advice...make sure you have the latest fsck patch for your os.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

sed Or Grep Problem OR Terminal Problem?

I don't know if you guys get this problem sometimes at Terminal but I had been having this problem since yesterday :( Maybe I overdid the Terminal. Even the codes that used to work doesn't work anymore. Here is what 's happening: * I wanted to remove lines containing digits so I used this... (25 Replies)
Discussion started by: Nexeu
25 Replies

2. IP Networking

Problem with forwarding emails (SPF problem)

Hi, This is rather a question from a "user" than from a sys admin, but I think this forum is apropriate for the question. I have an adress with automatic email forwarding and for some senders (two hietherto), emails are bouncing. This has really created a lot of problems those two time so I... (0 Replies)
Discussion started by: carwe
0 Replies

3. AIX

AIX OS problem? network problem?

Dear ALL. I installed AIX OS on customer sites. but Only one site is too slow when I connected telnet, ftp.. Ping is too fast. but telnet and FTP is not connected.. of course i check the configuration file on aix but it's normal. Do any Idea?? thanks in advance. - Jun - (3 Replies)
Discussion started by: Jeon Jun Seok
3 Replies

4. UNIX for Dummies Questions & Answers

DHCP problem and eth1 problem

At work I am trying to get this one Linux machine (let's call it ctesgm07) to behave like another Linux machine that we have (let's call it test007). test007 returns the following version info: cat /etc/debian_version: lenny/sid uname -a: Linux test007 2.6.27-7-generic #1 SMP Tue Nov 4... (0 Replies)
Discussion started by: sllinux
0 Replies

5. Red Hat

Mail Problem. Maybe, it is a DNS Problem!

Hi, i've a redhat linux 9 upadated by redhat from 7 version to 9 version. A couple of days ago i was a problem with my mail, in other words i'm not able to get any email nor to send any email. I've a proxy configuration and i tried to set iptables in order to verify the port. The 110,255 and 995... (1 Reply)
Discussion started by: pintalgi
1 Replies

6. AIX

user login problem & Files listing problem.

1) when user login to the server the session got colosed. How will resolve? 2) While firing the command ls -l we are not able to see the any files in the director. but over all view the file system using the command df -g it is showing 91% used. what will be the problem? Thanks in advance. (1 Reply)
Discussion started by: pernasivam
1 Replies

7. Solaris

problem in finding a hardware problem

Hi I am right now facing a strange hardware problem. System get booted with the following error: Fatal Error Reset CPU 0000.0000.0000.0003 AFSR 0100.0000.0000.0000 SCE AFAR 0000.07c6.0000.1000 SC Alert: Host System has Reset It happen 4 or 5 times and get the same error every time.I... (8 Replies)
Discussion started by: girish.batra
8 Replies

8. Shell Programming and Scripting

ssh script problem problem

Hi Please help me with the following problem with my script. The following block of code is not repeating in the while loop and exiting after searching for first message. input_file ========== host001-01 host001-02 2008-07-23 13:02:04,651 ConnectionFactory - Setting session state... (2 Replies)
Discussion started by: pcjandyala
2 Replies

9. Shell Programming and Scripting

problem with dd command or maybe AFS problem

Hi, folks. Sorry for bothering, but maybe someone could help me please. The problem is the following: there is some script that copies files from local file system to AFS. The copying is performed with dd command. The script copies data into some AFS volumes. The problem appeared with one... (0 Replies)
Discussion started by: Anta
0 Replies

10. UNIX for Advanced & Expert Users

SSH Problem auth problem

Hi, Just recently we seem to be getting the following error message relating to SSH when we run the UNIX script in background mode: warning: You have no controlling tty. Cannot read confirmation.^M warning: Authentication failed.^M Disconnected; key exchange or algorithm negotiation... (1 Reply)
Discussion started by: budrito
1 Replies
Login or Register to Ask a Question