Unable to bring a disk from error to online state.
Hello experts.
I am using Solaris 10(2005) on intel machine. I have installed Veritas Volume manager 5.0. I am unable to bring a disk error to online state. I would like to bring that disk to CDS format.
Commands i used and output are....
Code:
#vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto - - error
c1t1d0s2 auto:none - - online invalid
#vxconfigd -k
Jul 5 07:29:59 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-148 enabled path 102/0x40 belonging to the dmpnode 179/0x40
Jul 5 07:29:59 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-147 enabled dmpnode 179/0x40
Jul 5 07:29:59 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 102/0x40 belonging to the dmpnode 179/0x40
Jul 5 07:29:59 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-111 disabled dmpnode 179/0x40
Jul 5 07:29:59 younus vxdmp: NOTICE: VxVM vxdmp 0 dmp_tur_temp_pgr: open failed: error = 6 dev=0xb3/0x42
#vxdctl mode
mode: enabled
#vxdmpadm enable ctlr=c0
mic_attr: Could not do stat on path /dev/rdsk/c0t0d0s2
ddl_get_dynamic_attr: Could not do stat on path /dev/rdsk/c1t1d0s2
Jul 5 07:34:01 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-148 enabled path 102/0x40 belonging to the dmpnode 179/0x40
Jul 5 07:34:01 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-147 enabled dmpnode 179/0x40
Jul 5 07:34:01 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-0 enabled controller /pci@0,0/pci-ide@1f,1/ide@0 connected to disk array OTHER_DISKS
Jul 5 07:34:01 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-112 disabled path 102/0x40 belonging to the dmpnode 179/0x40
Jul 5 07:34:01 younus vxdmp: NOTICE: VxVM vxdmp V-5-0-111 disabled dmpnode 179/0x40
Jul 5 07:34:01 younus vxdmp: NOTICE: VxVM vxdmp 0 dmp_tur_temp_pgr: open failed: error = 6 dev=0xb3/0x42
#vxdmpadm listctlr ctlr=c0
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c0 OTHER_DISKS DISABLED OTHER_DISKS
#vxdmpadm listctlr ctlr=c1
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c1 OTHER_DISKS ENABLED OTHER_DISKS
pls dun use vxdiskadm. bring the system down to single user. is your system connected to SAN? do a fsck on the rootvol and datadgs first.
try to mount them in single user to see if any error is hit. DO A BACKUP FIRST!!.
Try importing the disk groups manually first. You can refer to Veritas website for checking on the error code statuses, if any.
Hi all, I have the following in hacmp.out for bringing Resource group online.
Volume groups themselves are Enhanced-Capable and on each node I can varyon and mount filesystems.
+main1_rg_01:cl_activate_vgs STATUS=0
+main1_rg_01:cl_activate_vgs typeset -li STATUS
+main1_rg_01:cl_activate_vgs... (2 Replies)
Hi Experts,
Problem summary :
I am facing the below problem on huge files when the disk is getting full on the half way through the execution.
If the disk was already full , the commands fail & everything is fine.
Sample Code :
head_rec_data_file=`head -1 sample_file.txt`
cat... (9 Replies)
this is samiulla
in my vmware solaris 11 i installed iscsitgt pakage but it goes to maintenance
and i am unable to bring into online with svcadm clear iscsitgt
how can i forcefully online iscsitgt service. (1 Reply)
:confused:
when i tried to look the status of DNS-client, it is in maintenance mode.....
Please tell me how to bring it back to online mode...PLEASE TELL ME STEP BY STEP.... PLEASE...
:wall: (2 Replies)
Hi Guys,
I want to bring my server live.
I have Static public IP Address 123.99.88.77 (Say) and also I have also registered a domain name say(live server23.com) the domain name providers have also given me the control panel with DNS management settings.
I have gateway 192.168.1.1
Now My... (1 Reply)
Hello,
I have few HDD and SSD installed in my RHEL 5 server. I want to know which disk are SDD and which are HDD. What command should I use?
Thanks (3 Replies)
The last thing I did was set REMOTE_LOGIN_PASSWORDFILE to EXCLUSIVE. Then rebooted server. Since that time I have not been able to login. During bootup it can't find root and generates alot of errors. Does anybody know of a default login and password that will allow me to log in and rebuild the... (2 Replies)
I have Linux 7.1 setup on a Dell and am unable to bring up any interfaces. Both the lo and eth0 fail upon boot up and I get a insmod error possibly due to bad irq or IO setting.
If I disable eth0 upon boot, then lo works fine, but offcourse I get the "delaying initialization" upon boot for eth0... (1 Reply)
