10 More Discussions You Might Find Interesting
1. Solaris
We have 2 solaris 10 t5240 servers with static IP addresses on nxge0 I/F which were rebooted a few days back with a known good config that has been in place for years (for /etc/hosts, /etc/hostname.nxge0, /etc/netmasks, etc)
They are not using dhcp.
About the same time today, both of their... (7 Replies)
Discussion started by: hdatontodo
7 Replies
2. Solaris
I have installed Solaris 11.2 in VMware Player, networked in bridged mode. When Solaris uses DHCP everything is OK, I can reach internet, as well as other systems on my LAN. When I switch to static, I have connections to my LAN, but can not get to internet, the DNS resolution is somehow not... (2 Replies)
Discussion started by: migurus
2 Replies
3. Solaris
Hello All,
Problem is that redundancy doesn't work, probably a routing issue I need to get sorted out When 172.29.11.x net is down, neither node3 nor node4 is trying 172.29.12.x network,The problem lies in network 172.29.13.x
if 172.29.11.x network is down, node3/node4 should route to... (6 Replies)
Discussion started by: nadeemahmed
6 Replies
4. Solaris
ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255
ether 0:14:4f:55:82:9
ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
inet 10.231.11.232 netmask... (3 Replies)
Discussion started by: busyboy
3 Replies
5. Linux
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
... (0 Replies)
Discussion started by: mfondoum
0 Replies
6. Solaris
Hi,
I have cloned a SOLARIS 8 (BLADE 150) Hard Disk and have put into other system. So, now how do I configure the NIC and assign static IP for this new machine ? (8 Replies)
Discussion started by: angshuman_ag
8 Replies
7. Solaris
I have a SUN ultra 5 machine running Solaris 6. it has two ethernet interfaces qe0 192.168.0.111 and qe1 192.168.1.111
the two subnets are 192.168.0.111 255.255.255.0
192.168.1.111 255.255.255.0
the specified routes are
add route -net 192.168.0.0 255.255.255.0 192.168.0.111
add route... (3 Replies)
Discussion started by: adol65
3 Replies
8. Solaris
Hi,
I got problem of Sun Solaris 8 routing.
IP of SunA is 10.16.64.164, and have routing table:
10.16.64.0 10.16.64.164 U 1 19236 bge1
10.6.0.0 10.6.0.3 U 1 16534 bge0
224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
Discussion started by: milo
4 Replies
9. Solaris
Hello,
Iam having problems getting more then one ip to work here is my setup!
Hostname: nexus
NIC: e000g1
(example ips)
My ips 80.80.80.15 to 80.80.80.20
Defaultrouter 80.80.80.1
nameservers 80.80.80.100 and 80.80.80.200
How would i do this? Any help would be mutch appriciated!... (7 Replies)
Discussion started by: empty
7 Replies
10. IP Networking
hi,
below is the situation:
my server is in 128.10.200.xxx network.
i have a solaris computer running in a subnet. this computer got 2 nic card.
1 is 172.18.198.xxx , another 1 is 10.100.xxx.11
there is a machine stick with this computer, ip is 10.100.xxx.12
so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies
routes(4) Kernel Interfaces Manual routes(4)
NAME
routes - Specifies Internet routing information to the routing tables
SYNOPSIS
/etc/routes
DESCRIPTION
Static routes can be defined in the /etc/routes file. The /etc/routes file identifies static routes that are automatically added to the
network routing tables with the /usr/sbin/route add command. The /sbin/init.d/route script contains the /usr/sbin/route add command that
is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.
The general format of an entry in the /etc/routes file is: Dest Name1 Name2
The following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
work or to a host. The two possible keywords are -net and -host. The name or address of the destination network or host. Name1 can be
either a symbolic name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format. The
name or address of the gateway host to which messages should be forwarded. Name2 can be either a symbolic name (as used in the /etc/hosts
file) or an Internet address specified in dotted-decimal format.
The routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such. See the System Administration manual for more
information.
EXAMPLES
To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:
-net net2 host4
This example specifies a route to a network, net2, through the gateway host4. To specify a route to a host through a gateway host
with an entry in the /etc/routes file, enter:
-host host2 host4
This example specifies a route to a host, host2, through the gateway host4. To specify a route to a default gateway host with an
entry in the /etc/routes file, enter:
default 130.9.0.5
This example specifies a route to a default gateway with an Internet address of 130.9.0.5.
FILES
Contains the /usr/sbin/routed add command.
RELATED INFORMATION
Commands: route(8)
Daemons: gated(8), routed(8)
Files: gated.conf(4)
Network Administration delim off
routes(4)
