HP DL380 G3 vs Solaris 10

8 More Discussions You Might Find Interesting

1. SCO

SCO 5.0.7 driver for HP SmartArray P410i Controller on Proliant DL380 G7?

Hi I hope this is the right forum. I am attempting to install SCO 5.0.7 on a Proliant DL380 G7 with a Smart Array P410I Controller. I need a driver for this. Can anybody point me to a download? Thanks in anticipation.

2. Linux

CentOS 6.6 SSD trim on HP DL380 G2 RAID 0

I'm running glusterfs on CentOS 6.6 two nodes, (the SSD (samsung 840 1TB x2) is RAID 0 on the HP DL380 G6) x2, and trimming is not enable on it by checking /dev/sdb1/xxxxx/discard_max_bytes=0. Do I still need trimming? Somehow my filesystem is fine with 35-30% free space and running very fast. ...

3. UNIX for Dummies Questions & Answers

HP DL380 G6 ILO question Linux

Hi, I have Redhat Linux 5.9. I need to connect all the ILO to different switch which can support 1 Gig. How can I find if ILO port can support gigabit? I am on HP website but not able to find anything about this information. Not sure I am looking in the correct place. Please help.

4. Red Hat

HP DL380 g6 Riser kit

I have 2 DL380g6 servers, one server has a riser kit installed and the other does not. running rhel5.6, how from the OS can I see the riser kit is installed? lspci didn't list the riser kit, but then again I'm not entirely sure its classified as a pci device? Is there a way to see it from the OS

5. Debian

HP ProLiant DL380 G4 w/ Debian... If your familiar with this machine please help.

Hello, I have a few questions about this server. It has two CPU's 3.20 ghz / 800 mhz / 1MB L2 5120 MB RAM 6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each) RAID set to RAID 5 (5 discs) with one spare (6th disk) USB, 2 Ethernet ports, 1 ILO port, 1 SCSI port ...

6. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be...

7. UNIX for Dummies Questions & Answers

SCO Openserver 6.0 Insall on HP DL380 serverl

Trying to install Openserver 6.0 on this server which has an integrated Smart Array P400. Install halts with the message ....... "Incorrect Disk Partitioning .........................." I havent yet got to the "divvy" and disk partitioning section of the install section so I am...

8. Debian

Problem installing debian 4.0 on hp dl380 G5

ello all.. I really have a big problem installing debian 4.0 on HP dl380 G5 ,2 74 sScsi in raid 1 (mirror), after all selected options, it's freezes on getting files 125 of 125 and stops on 5% of the installation. I've try with different cd's and cd-roms so that's not the problem! Can someone...

LEARN ABOUT OPENSOLARIS

install-solaris

install-solaris(1M)                                                                                                            install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris  invokes  the  Solaris  Install  program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

           Minimum physical memory for all installation types

       128 MB

           Minimum physical memory required for windowing system

       384 MB

           Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

           Minimum physical memory for all installation types

       256 MB

           Minimum physical memory required for windowing system

       512 MB

           Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris  exists  only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWcdrom  (Solaris instal-  |
       |                             |lation media)                |
       +-----------------------------+-----------------------------+
       |Interface Stability          |Evolving                     |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

                                                                    23 Sep 2005                                                install-solaris(1M)

Solaris