Sun Blade 100 Disk Compatibility

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

SUN BLADE T6340 - which OS ?

Hi, I have server SUN BLADE T6340 and i tried install debian sparc on this machine. Will it work ? In the specification is written only Solaris 10.

2. Solaris

help installing solaris 10 on sun blade 1500

Hi everyone can someone please explain to me how to install solaris 10 on a sunblade 1500 using cdrom? Thanks for your assistance

3. UNIX for Dummies Questions & Answers

Reinstalling Solaris 9 on Sun Blade 100

For the past ten years I have owned a blade 100, and I had Solaris 9 running on it. Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris...

4. Solaris

Sun Blade 150 not a Sun?

I have recently re-installed Solaris 10 on a Sun Blade 150 followed by a patch set (10_Recommended) dated 2011.12.05. I have just noticed /bin/sun now returns false, rather than true. See below. $ uname -a SunOS myblade1 5.10 Generic_147440-07 sun4u sparc SUNW,Sun-Blade-100 $ /bin/sparc &&...

5. UNIX for Dummies Questions & Answers

Serial Connection sun blade 100 to pc

Hi, If someone please help as my efforts been exhausted in connecting my sun blade 100 serial to my pc. I am using null modem with DB9(female) in sun blade and DB9(female, using gender change) in pc. I am trying both hyper/putty 9600 8 N 1 configurations. Thanks

6. Solaris

Sun Blade 100 cdrom problems...

FYI noob to here and sun blades... I have a sun blade 100 and I can't get the cdrom to work. if i try using vold that doesn't seem to work either...maybe i'm not using it correctly. Upon boot you can open/close the cdrom and it runs but after i'm logged in it won't open and i can't access it...

7. Solaris

Sun Blade 100 Memory Upgrade

Hi, I've been a member for a while but have never posted. I have a Sun Blade 100 desktop and I just installed Solaris 10 and it is unbearably slow. I only have 128 Meg of RAM and need to upgrade. I have searched and found many online resources that have RAM, but I was wondering if anyone has...

8. UNIX for Dummies Questions & Answers

sun blade 100 test-all frozen at pci@1f,0/usb/c,3

platform: sunblade 100 Solaris 10. When running a test-all from the ok prompt on this new (to me) system, it locks up at pci@1f,0/usb/c,3. It's been there for about 25 minutes. I do have a usb keyboard and mouse attached, both are known good. There is no flash stick/ thumb drive...

9. Solaris

Clone disk for Sun Blade 2000

Hai ......... my name Rio, I want to clone my harddisk at Sun Balade 2000 server with Solaris 8 OS, my question is : a. what kind method for making backup or clonning disk ? b. what method more easier , quick but still reliable ? c. how to proceed it ? Thanks

10. Solaris

sun Blade 2000 and XVR100

hello, I have SunBlade 2000 with XVR-1000 graphics card. Xserver won't loaded. I've reinstalled OS 9 ( loaded Driver) nor 10 still won't do it. Anyone has this problem or have any ideas whats' wrong, greatly appreciated!! thanks in adv.

LEARN ABOUT DEBIAN

mkqdisk

mkqdisk(8)						      Quorum Disk Management							mkqdisk(8)

NAME

       mkqdisk - Cluster Quorum Disk Utility

WARNING

       Use of this command can cause the cluster to malfunction.

SYNOPSIS

       mkqdisk [-?|-h] | [-L] | [-f label] [-c device  -l label] [-d [-d ...]]

DESCRIPTION

       The mkqdisk command is used to create a new quorum disk or display existing quorum disks accessible from a given cluster node.

OPTIONS

       -c device -l label
	      Initialize  a new cluster quorum disk.  This will destroy all data on the given device.  If a cluster is currently using that device
	      as a quorum disk, the entire cluster will malfunction.  Do not run this on an active cluster  when  qdiskd  is  running.	 Only  one
	      device  on  the  SAN should ever have the given label; using multiple different devices is currently not supported (it is expected a
	      RAID array is used for quorum disk redundancy).  The label can be any textual string up to 127 characters - and is therefore  enough
	      space to hold a UUID created with uuidgen(1).

       -f label
	      Find the cluster quorum disk with the given label and display information about it.

       -L     Display information on all accessible cluster quorum disks.

       -d     Increase debugging level.  Specify multiple times for more information.  Currently, specifying more than twice has no effect.

SEE ALSO

       qdisk(5), qdiskd(8), uuidgen(1)

								     July 2006								mkqdisk(8)

Solaris