Login or Register to Ask a Question and Join Our Community


Solaris

Routing problem of Solaris

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Routing problem of Solaris
# 1  
Old 08-07-2007
Routing problem of Solaris
Hi,

I got problem of Sun Solaris 8 routing.

IP of SunA is 10.16.64.164, and have routing table:

10.16.64.0 10.16.64.164 U 1 19236 bge1
10.6.0.0 10.6.0.3 U 1 16534 bge0
224.0.0.0 10.6.0.3 U 1 0 bge0
default 10.16.64.1 UG 1 44741
127.0.0.1 127.0.0.1 UH 1 457 lo0

Another SunB server is 10.24.64.160. From SunA traceroute to SunB, packet was sent to 10.16.64.3 instead of 10.16.64.1.

Additionally, this status is not stable. It means some time SunA sends packet to 10.16.64.1 and others, it sends to 10.16.64.3.

Appreciate all reply.

Thanks,
# 2  
Old 08-07-2007
What subnet masks are you using?
# 3  
Old 08-07-2007
subnet is 255.255.252.0
# 4  
Old 10-22-2008
255.255.255.252
A2 ip address can only have 4 octets with a grand total of 32 bits and no more!

therefore and ip address like 255.255.225.252.0 is not a llegitimate address as it 40 bytes making it illagitiament.
# 5  
Old 10-25-2008
Quote:
Originally Posted by FloridaBSD
255.255.255.252
A2 ip address can only have 4 octets with a grand total of 32 bits and no more!

therefore and ip address like 255.255.225.252.0 is not a llegitimate address as it 40 bytes making it illagitiament.
Im afraid you saw it wrongly.. He mentioned as 255.255.252.0 Smilie
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris Routing

Hello All, Problem is that redundancy doesn't work, probably a routing issue I need to get sorted out When 172.29.11.x net is down, neither node3 nor node4 is trying 172.29.12.x network,The problem lies in network 172.29.13.x if 172.29.11.x network is down, node3/node4 should route to... (6 Replies)
Discussion started by: nadeemahmed
6 Replies

2. Solaris

Routing problem

Hi, I have two physical interfaces on a servers. We have connected them to differerent subnets. 1) First interface: 10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1 (It is added as default gateway) It is existing set up. It works well 2) Second interface: ... (1 Reply)
Discussion started by: sri243
1 Replies

3. Solaris

solaris routing between two networks

ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2 inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255 ether 0:14:4f:55:82:9 ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3 inet 10.231.11.232 netmask... (3 Replies)
Discussion started by: busyboy
3 Replies

4. IP Networking

solaris routing between two networks

ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2 inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255 ether 0:14:4f:55:82:9 ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3 inet 10.231.11.232 netmask... (1 Reply)
Discussion started by: busyboy
1 Replies

5. Solaris

ip routing in solaris

I have a SUN ultra 5 machine running Solaris 6. it has two ethernet interfaces qe0 192.168.0.111 and qe1 192.168.1.111 the two subnets are 192.168.0.111 255.255.255.0 192.168.1.111 255.255.255.0 the specified routes are add route -net 192.168.0.0 255.255.255.0 192.168.0.111 add route... (3 Replies)
Discussion started by: adol65
3 Replies

6. IP Networking

solaris 8 networking routing

hi all, how do i make sure that the new routing should take effect on the os memory right away? what should i run after i add all the new "route add ....". I have an example below: bash-2.03# netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface... (1 Reply)
Discussion started by: itik
1 Replies

7. IP Networking

routing problem in solaris

hi, below is the situation: my server is in 128.10.200.xxx network. i have a solaris computer running in a subnet. this computer got 2 nic card. 1 is 172.18.198.xxx , another 1 is 10.100.xxx.11 there is a machine stick with this computer, ip is 10.100.xxx.12 so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies

8. IP Networking

Routing Problem

I have a question concerning networking. Could any forum members explain to me why I might be getting "no route to host" messages when I try to connect through ftp and http protocols? I have went to my etc/hosts file and everything seems to be configured properly. I can connect within my... (1 Reply)
Discussion started by: cstovall
1 Replies

9. IP Networking

routing problem

following Problem. I configured my SuSE Linux 8.0 as a router. I4l, named, ip_forward, iptables (NAT/MASQUERADING) are running or are aktivatet. I just can get a internet connection about the proxy server squid, but if i want to use other protocols i need functional routing. (I had this... (1 Reply)
Discussion started by: razor
1 Replies

10. IP Networking

Routing problem

Hi I know this problem is more likely some windows problem but it has also something to do with unix. We have a windows nt environment wich uses AIX (unix) machines as file servers (samba). In our windows network environment we nicely see al the unix file servers via the 10 MB network. Last... (2 Replies)
Discussion started by: Mark Detrez
2 Replies
Login or Register to Ask a Question