import UCD-SNMP-MIB into snmpd

10 More Discussions You Might Find Interesting

1. AIX

AIX native SNMP producing limited results when walking MIB tree

The company I work for has various AIX servers that I've recently migrated to AIX 7.1 (from 6.1). Some are powerHA clusters some are not. Likewise, the systems engineer that I replaced had net-snmp installed on said clustered systems. Long story short I am re-invoking AIX's native SNMP (v3) for...

2. UNIX for Dummies Questions & Answers

Need to transfer all kernel logs (var/log/messages) to the snmp listener as snmp trap

i am working with embedded system -Dell DCS management sub system. my question is as below: currently we are using linux kernel 2.6.30 build and we have a kernel logs stored to the /var/log/messages path. now we have to transfer all this logs to the specified SNMP target as a part of SNMP...

3. Red Hat

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide.

4. IP Networking

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

5. Infrastructure Monitoring

Solaris 10 Snmp command to MiB OID

Hi guys, I am doing follow this guy Tech deposits. : iostat monitoring for zenoss and such I stuck at this step: Add a line into /etc/snmp/snmpd.conf file: pass .1.3.6.1.4.1.2021.255.1 /usr/local/bin/sar_iostat_snmp.sh -m 1 -d dev253 -o .1.3.6.1.4.1.2021.255.1 and test snmp by the...

6. Infrastructure Monitoring

Proper permission /etc/snmp/snmpd.conf

Hi All, I'm hardening my linux. And I came across with this file. /etc/snmp/snmpd.conf It's current mod is 644 with root:root ownership and group. Can I make this 640 without hurting the OS? Meaning no public read access. Does other resources need to read to it? Thanks and more...

7. HP-UX

SNMPD: need a little help.

Hi there all, I am running here an HP UX 11i v1. I got snmpd running here now. But how do I configure it so it also shows the HD's and swap and RAM's? So I can get the info back to Solarwinds Orion? All I get now is network card status. I want as many info as posible.. Thanx and...

8. Linux

Snmpd

Hello to all. For setting my MRTG i want get snmp-info with LAN interface eth0 but information about snmpd daemon very small :(

9. Solaris

Any Idea about (SNMP) HOST-RESOURCES-MIB

Hello , I am using (Application Manager 7) software for monitoring. I want to add the servers to monitored using SNMP but it shows this error HOST-RESOURCES-MIB is not implemented in the Snmp Agent. your help is highly appreciated ..... :)

10. SCO

Want to set up SNMP with MIB on SCO OS5

Want to setup snmp with mib to track system issues on SCO OS5.0.5. Is there somewhere I can look that will give me insight in how to answer some of the questions the mkdev snmp asks?

LEARN ABOUT CENTOS

snmpdf

SNMPDF(1)							     Net-SNMP								 SNMPDF(1)

NAME

       snmpdf - display disk space usage on a network entity via SNMP

SYNOPSIS

       snmpdf [COMMON OPTIONS] [-Cu] AGENT

DESCRIPTION

       snmpdf  is  simply  a  networked  version  of  the  typical  df	command.   It checks the disk space on the remote machine by examining the
       HOST-RESOURCES-MIB's hrStorageTable or the UCD-SNMP-MIB's dskTable.  By default, the hrStorageTable is preferred as it  typically  contains
       more information.  However, the -Cu argument can be passed to snmpdf to force the usage of the dskTable.

       AGENT  identifies  a  target SNMP agent, which is instrumented to monitor the gievn objects.  At its simplest, the AGENT specification will
       consist of a hostname or an IPv4 address.  In this situation, the command will attempt communication with the agent, using UDP/IPv4 to port
       161 of the given target host. See the snmpcmd(1) manual page for a full list of the possible formats for AGENT.

       See the snmpd.conf(5) manual page on setting up the dskTable using the disk directive in the snmpd.conf file.

OPTIONS

       COMMON OPTIONS
	       Please see snmpcmd(1) for a list of possible values for COMMON OPTIONS as well as their descriptions.

       -Cu     Forces  the command to use dskTable in mib UCD-SNMP-MIB instead of the default to determine the storage information. Generally, the
	       default use of hrStorageTable in mib HOST-RESOURCES-MIB is preferred because it typically contains more information.

EXAMPLES

       % snmpdf -v 2c -c public localhost

       Description	 size (kB)	   Used    Available Used%
       /		   7524587	2186910      5337677   29%
       /proc			 0	      0 	   0	0%
       /etc/mnttab		 0	      0 	   0	0%
       /var/run 	   1223088	     32      1223056	0%
       /tmp		   1289904	  66848      1223056	5%
       /cache		    124330	   2416       121914	1%
       /vol			 0	      0 	   0	0%
       Real Memory	    524288	 447456        76832   85%
       Swap Space	   1420296	 195192      1225104   13%

SEE ALSO

       snmpd.conf(5), snmp.conf(5)

V5.7.2								    25 Jul 2003 							 SNMPDF(1)

Solaris