Login or Register to Ask a Question and Join Our Community


Solaris

Where are routes stored ?

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Where are routes stored ?
# 1  
Old 10-04-2006
Where are routes stored ?
Hi there

When adding a route (or indeed deleting a route) which file is amended ? I am moving a box from one network to another and when it starts up it tries to connect run 'add net 192.x.x.x' etc etc ...but i dont want it to do that

where do I edit these route additions


cheers
# 2  
Old 10-04-2006
If it's a manual addition, check /etc/init.d or /etc/rc2.d and see if there's a local file. The group I was with had a S96local script with specific route additions. You can also just grep the "add net" in the init.d directory to find the file if it's something else.

Carl
# 3  
Old 10-08-2006
plz ,
go to /etc/defaultrouter and check it
# 4  
Old 10-10-2006
right the altered is /etc/defaultrouter. use following commands to flush and add the router entry

Code:
route flush <arguments>
route add default <arguments>

# 5  
Old 10-14-2006
if you add a route manualy with "route add ...." no file is altered. if you want this route to become permanent, edit the file /etc/inet/routes.
# 6  
Old 10-17-2006
manually : route add default xx.xx.xx.xx
config file : /etc/defaultrouter ( default not have this file )
dynamic : in.routed Smilie
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Problem with routes in Solaris 10

Hello All, I have a Solaris 10 machine with 4 physical network interfaces configured viz. igb0, e1000g0, igb2 and e1000g2. Out of these interfaces, I am routing all my normal monitoring and O&M activities via. igb0 and e1000g0 interfaces. However, I am facing an issue on one of the... (4 Replies)
Discussion started by: mystition
4 Replies

2. SCO

Static routes in SCO

Hi, Just a question of thought. Why one needs to add static routes on Unix servers ? If I had ethernet card, it already has the settings for gateway for incoming and outgoing requests. We donot have to explicitly set the route it should take. Then what is the use... (3 Replies)
Discussion started by: dextergenious
3 Replies

3. IP Networking

Unix Network Routes

I would really appreciate some help with HP UX's Network Routes. Basically, what I want to do is, I would want a system with global ip (eg: 202.144.138.122) to ping/access my HP-UX server which is with private IP address (192.168.1.23). I have all the routers/switches in between properly route... (2 Replies)
Discussion started by: damchey
2 Replies

4. UNIX for Dummies Questions & Answers

Routes being automatically added

Hello, I have two AIX 5.3 servers that are supposedly set up exactly the same. The problem I am having is on one of the servers, it seems dynamic routes are being added mysteriously and non-periodically. This only happens on one server and not the other. Also, there doesn't seem to be a specific... (1 Reply)
Discussion started by: Conutmonky
1 Replies

5. AIX

Static Routes question

I added a static route through smit using: Communications applications and Services ==> TCIP/IP ==> Further Configuration ==> Static Routes ==> Add a Static Route ==> Route Type of host Filled in Destination Address, Default Gateway Address and Network Interface of en0. This... (2 Replies)
Discussion started by: jyoung
2 Replies

6. IP Networking

How to delete some ipv6 routes?

Hi, How can i delete the following routes on my OpenBSD 4.1 system? # route -n show (including only relevant ipv6-routes) Internet6: Destination Gateway Flags Refs Use Mtu Interface ::/104 ::1 UGRS 1 0 ... (1 Reply)
Discussion started by: phalcos
1 Replies

7. Solaris

adding routes in Solaris

Solaris Guru's What is the proper way to add routes in the routing table so after a node reboot the routes will not be lost. I understand the /etc/defaultrouter for the default router and the <route add> command but using this command routes will be removed once the node reboots. Thanks (7 Replies)
Discussion started by: Brad_52000
7 Replies

8. AIX

Multiple Default routes

Hi All, I have a AIX server running v5.2 and its having multiple default routes configured to two seperate gateway. Here's the output of -- netstat -rn Routing tables Destination Gateway Flags Refs Use If PMTU Exp Groups Route Tree for Protocol Family 2... (2 Replies)
Discussion started by: rramanuj
2 Replies

9. Debian

Setting Routes and such

Ok, I made changes to my routing tables..... which file do I modify to make the routes initialize correctly when the machine boots up? I work with all flavours of Unix/Linux... but this is an older box... Linux, Release 2.2.14-5.0. I did a grep for the default route in /etc, but didnt find... (2 Replies)
Discussion started by: djsal
2 Replies

10. IP Networking

Multiple Interfaces and Routes

I have a Unix box with 2 network interfaces on the same IP subnet and would like to add a host route via a specific interface. Any assistance would be greatly appreciated. (3 Replies)
Discussion started by: diemos
3 Replies
Login or Register to Ask a Question