Quote:
#ndd -set /dev/hme instance 0
#ndd -set /dev/hme adv_100fdx_cap 1
#ndd -set /dev/hme adv_100hdx_cap 0
#ndd -set /dev/hme adv_10fdx_cap 0
#ndd -set /dev/hme adv_10hdx_cap 0
#ndd -set /dev/hme adv_autoneg_cap 0
ok I'll break this down into smaller bit.
instance 0 This defines the instance(NIC/port)
adv means advertise
cap means capability
10 and 100 fdx and hdx you already know
autoneg is autonegotiation.
1 means enabled and 0 disabled.
so what you are doing is setting the interface to advertise only 100fdx capability and won't autonegotiate a slower setting.