Sun Ultra 30 boot problems


 
Thread Tools Search this Thread
Operating Systems Solaris Sun Ultra 30 boot problems
# 1  
Old 10-22-2019
Sun Ultra 30 boot problems

Hi all,
I've just replaced the eprom battery on my Sun Ultra-30 and having boot issues. For some reason its trying to boot off the network instead of the DISK1. Howe can I change it so the open boot does not default to the boot device: NET

Thanks,
Rob
# 2  
Old 10-22-2019
Hi,

You'll have to check the nvram contents and set them accordingly, a short term fix to get the system back up would be from the ok ptompt. Run the command boot disk or boot disk1this should boot you into the OS.

From there you can reset the contents using the the eeprom command see man eeprom.

Regards

Gull04

Last edited by gull04; 10-22-2019 at 05:35 AM.. Reason: Wrong code tags.
This User Gave Thanks to gull04 For This Post:
# 3  
Old 10-22-2019
ok great thanks. I reset the the open boot to its defaults then selected the boot-device disk1 and its working Smilie
# 4  
Old 10-22-2019
Hi,

Not a problem, you should try to get a note of the config prior to changing a battery - it can save a bit of greif especially if there are RAID disks involved.

Regards

Gull04
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Sun ultra 30 boot problem

Hi all, I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI... (2 Replies)
Discussion started by: robbo007
2 Replies

2. Solaris

Ultra 45 Boot Loop

I am trying to get an old Ultra 45 to boot and it is stuck in a loop. I cannot get anything to come up on a monitor, so when I hook up a serial connection to the TTYa interface I see the following output: @(#)OBP 4.21.2 2005/12/22 17:17 Sun Ultra 45 Workstation Clearing TLBs Loading... (0 Replies)
Discussion started by: Madrox72
0 Replies

3. Solaris

Ultra 5 will not boot from DVD ROM :(

Hi, I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation. When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and... (8 Replies)
Discussion started by: greypilgrim
8 Replies

4. UNIX for Dummies Questions & Answers

SUN Ultra 10 won't boot - Help Please

Folks; My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again. i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies

5. Solaris

Sun Sparc Ultra 4 won't boot - disk errors

Hi all. I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'. I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies

6. Solaris

ultra 10 boot warning---corrupt label

Hi All, Any idea why i'm having this warning during boot: WARNING: /pci@1f,0/pci@1,1/ide@3/dad@1,0 (dad1): corrupt label - wrong magic number This happens after I added another ide HD and reinstall it from solaris 10 to solaris 8. Thanks in advance. (7 Replies)
Discussion started by: itik
7 Replies

7. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
Discussion started by: zosojohnny
0 Replies

8. Solaris

Ultra 60 strange disk problems

Hello, I just bought a nice ultra 60 with 2x36gb scsi disks (fujitsu MAJ3364MC, sun partnr 540-4521). If i do a probe-scsi-all in obp the disk anounces itself as SUN36G. In a booted system however, I can only use 9 gb and the disk is seen in format as 9.0 gb. My own wild uneducated... (4 Replies)
Discussion started by: poltergeist
4 Replies

9. Solaris

sun ultra

Hi Guys, I have a 2nd hand Sun ultra-5, I wanted to know how to be able to run it as a normal window. I do not have any experience whatsoever with solaris/unix. Does anyone can give me a clue where to start. When I switch it goes to: unix console login: pa$$word: #UNIX sendmail : enable to... (0 Replies)
Discussion started by: lingosa
0 Replies

10. Solaris

sun ultra or sun sparkstation

am wonder wich sun computer is better, a sun ultra or sun sparkstation, and what is the difference (7 Replies)
Discussion started by: nobody
7 Replies
Login or Register to Ask a Question