I am trying to setup a storage server with salvaged equipments:
QSSC-S4R server, with QLogic 2562 FC HBA's
Clariion KTN-STL4 4GB FC Enclosures
Disks Salvaged from EMC Vmax
Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But in solaris, it doesnt create any multipath devices
This would indicate that the server was already connected to the SAN and that the command has been run to stop the system displaying multiple paths for each device, normally the first time you run stsmbooyt a reboot is required.
root@replica:~# mpathadm show lu
Logical Unit: /dev/rdsk/c0t5000CCA00E7DACD0d0s2
mpath-support: libmpscsi_vhci.so
Vendor: HITACHI
Product: HUS15603 CLAR300
Revision: C7A0
Name Type: unknown type
Name: 5000cca00e7dacd0
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000cca00e7dacd1
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000cca00e7dacd2
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000cca00e7dacd1
Relative ID: 0
Name: 5000cca00e7dacd2
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000CCA00E7DA718d0s2
mpath-support: libmpscsi_vhci.so
Vendor: HITACHI
Product: HUS15603 CLAR300
Revision: C7A0
Name Type: unknown type
Name: 5000cca00e7da718
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000cca00e7da719
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000cca00e7da71a
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000cca00e7da719
Relative ID: 0
Name: 5000cca00e7da71a
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000A72030029682d0s2
mpath-support: libmpscsi_vhci.so
Vendor: STEC
Product: ZIV2A210 CLAR200
Revision: 100H
Name Type: unknown type
Name: 5000a72030029682
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000a72a30029682
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000a72b30029682
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000a72a30029682
Relative ID: 0
Name: 5000a72b30029682
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000A72030027603d0s2
mpath-support: libmpscsi_vhci.so
Vendor: STEC
Product: ZIV2A210 CLAR200
Revision: 100H
Name Type: unknown type
Name: 5000a72030027603
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000a72a30027603
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000a72b30027603
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000a72a30027603
Relative ID: 0
Name: 5000a72b30027603
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000A72030029683d0s2
mpath-support: libmpscsi_vhci.so
Vendor: STEC
Product: ZIV2A210 CLAR200
Revision: 100H
Name Type: unknown type
Name: 5000a72030029683
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000a72a30029683
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000a72b30029683
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000a72a30029683
Relative ID: 0
Name: 5000a72b30029683
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000CCA00E6ACB30d0s2
mpath-support: libmpscsi_vhci.so
Vendor: HITACHI
Product: HUS15603 CLAR300
Revision: C7A0
Name Type: unknown type
Name: 5000cca00e6acb30
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000cca00e6acb31
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000cca00e6acb32
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000cca00e6acb31
Relative ID: 0
Name: 5000cca00e6acb32
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000CCA00E7DB03Cd0s2
mpath-support: libmpscsi_vhci.so
Vendor: HITACHI
Product: HUS15603 CLAR300
Revision: C7A0
Name Type: unknown type
Name: 5000cca00e7db03c
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000cca00e7db03d
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000cca00e7db03e
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000cca00e7db03d
Relative ID: 0
Name: 5000cca00e7db03e
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000A720300297EAd0s2
mpath-support: libmpscsi_vhci.so
Vendor: STEC
Product: ZIV2A210 CLAR200
Revision: 100H
Name Type: unknown type
Name: 5000a720300297ea
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000a72a300297ea
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000a72b300297ea
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000a72a300297ea
Relative ID: 0
Name: 5000a72b300297ea
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000CCA00E7E4628d0s2
mpath-support: libmpscsi_vhci.so
Vendor: HITACHI
Product: HUS15603 CLAR300
Revision: C7A0
Name Type: unknown type
Name: 5000cca00e7e4628
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000cca00e7e4629
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000cca00e7e462a
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000cca00e7e4629
Relative ID: 0
Name: 5000cca00e7e462a
Relative ID: 0
Logical Unit: /dev/rdsk/c0t5000A72030027732d0s2
mpath-support: libmpscsi_vhci.so
Vendor: STEC
Product: ZIV2A210 CLAR200
Revision: 100H
Name Type: unknown type
Name: 5000a72030027732
Asymmetric: no
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 21000024ff4aec6a
Target Port Name: 5000a72a30027732
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 21000024ff4aec6b
Target Port Name: 5000a72b30027732
Override Path: NA
Path State: OK
Disabled: no
Target Ports:
Name: 5000a72a30027732
Relative ID: 0
Name: 5000a72b30027732
Relative ID: 0
Hi,
I am testing on iSCSI + multipath, where i have one iSCSI lun assigned to one server.
mpatha (1IET 00010001) dm-2 IET,VIRTUAL-DISK
size=100M features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 2:0:0:1 sda 8:0 active ready running
`-+-... (6 Replies)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Hi all
I have a system running:
uname -o
GNU/Linux
that has already some file systems created:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G 6% /
tmpfs 28G 72K 28G 1%... (5 Replies)
Hi,
How to find the raw device/multipath details of the LUN used by the diskgroups of the database.
file system type -- ASM
Oracle -- 11.2.0.3.0
OS -- Linux
This is RAC database.
Regards,
Maddy (2 Replies)
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
Hi all,
Currently i am involved in developing a device driver for a custom hardware.
My linux stack already has the sysfs directory structure
/sys/class/hwmon/
My need is that, while loading my device driver i need to create a "xyz" sysfs directory inside hwmon sysfs directory as... (0 Replies)
Hi guys,
I havent done this before but iam trying to create an image of a mirrorred drive.
Correct me if iam wrong, but when i have two disks setup in raid configuration and have them mirrored in solaris. It then defines at one entity.
How would i create a "flar" image of that one entity... (3 Replies)