After some problems, I have installed Solaris 11.4. The warnings said
Code:
WARNING: /pci@0,0/.....
(xhci1): Connecting device on port 5 failed
WARNING: /pci@0,0/.....
(xhci1): Connecting device on port 6 failed
Preparing image for use
Unable to mount media
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information)
Console login service(s) cannot run
The problem was that I had inserted the USB stick into a USB3 port. I instead used a USB2 port and could finally install Solaris 11.4. So for future reference, if anyone fails to install with these error messages, I have recorded the solution here.
Now I have a problem. I cannot get to X11. I see the splash screen, so I have graphics. But when I try to start X11, it does not work. How can I get X11 graphics?
After Solaris 11.4 installation, I added the desktop package:
Code:
# pkg install solaris-desktop
But still there is no X11. I reboot the PC, and see some error messages. Can anyone help me solve this problem? I have reinstalled the nvidia driver, I am using version 387.34 which is the one NVidia web site gave me.
I have a Supermicro X10SAT, E3-1245 cpu and a NVidia Geforce 1070Ti.
The error messages say:
Code:
WARNING: Signature verification of module /kernel/drv/amd64/nvidia failed
WARNING: Signature verification of module /kernel/drv/amd64/nvidia_modeset failed
Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.34
nvidia_modeset: Unloading
krtld: WARNING: Signature verification of module /kernel/drv/amd64/nvidia failed
krtld: WARNING: Signature verification of module /kernel/drv/amd64/nvidia_modeset failed
nvidia_modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms
And then I try to do "svcadm enable gdm" and after that I do "startx" and see these error messages:
Code:
xauth: file /export/home/root/.serverauth.1374 does not exist
X.org X Server 1.19.5
Release Date: 2017-10-12
X Protocol Version 11, Revision 0
Build Operating System: SunOS 5.11 i86pc
Current Operating System: SunOS 5.11 11.4.0.15.0 i86pc
Solaris ABI: 64-bit
Current version of pixman: 0.34.0
Before reporting problems, check https://support.oracle.com/ to make sure you have the latest version
(==) Log file: "/var/log/Xorg.0.log"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the Oracle corporation, based on X.Org Foundation sources support
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information
(EE)
(EE) Server terminated with error (1). Closing log file
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Last edited by kebabbert; 09-06-2018 at 06:50 AM..
Have you checked in /var/log/Xorg.0.log that the driver is loaded properly with all its modules? I would guess that this could be an issue. You could try loading X with Vesa instead to see if this is the case.
Hi,
I need to block ssh port 22 from all the servers except one server ip.
Until solaris11.3 and below, I used to do like below(under /etc/ipf/ipf.conf),and it's working fine
pass in quick from $server_ip to any port=22
block in quick from any to any port=22
But I tried almost same in... (1 Reply)
Hi all,
Just istalled Solaris 11.
Want to configure network interfaces and got some problems:
#dladm show-phys
#
#dladm show-link
#
If i run ifconfig -a, i am getting 2 lo0 (loopback) interfaces and thats all.
I can't enable interface, can't list it, can't assign IP to it.
Can... (2 Replies)
Simple question.
I have a solaris11 test machine
When i try to join a samba4 domain
give me this error
"kinit succeeded but ads_sasl_spnego_krb5_bind failed: invalid credentials"
When i join a w2003r2 AD..works perfect
I check network ok,dig,reverse ok..
my conf file is
... (0 Replies)
I am trying to connect via Xmanager 4 to a T4-2 server running Solaris 11.
I checked the /etc/gdm.custom.conf file.
The error I get is
The MAC (Message Authentication Code) of packet is incorrect
When I start the Xmanager on soalris I get a message
/dev/fb (file or directory) does not... (2 Replies)
Short version:
pfexec zpool scrub rpool fails saying I do not have permission to perform that action. Apparently scrub is not one of the pfexec allowed actions. Any idea on how to get around it?
Long version:
I got tired of manually running scrubs and am trying to set it to happen... (4 Replies)
I can log into a unix system with Putty. I've set the "X11 forwarding" checkbox, and I've verified that I can display an X11 window back on my laptop. What I need to be able to do is "su" to another uid after logging in and then run something which display a window back on my laptop, with the... (2 Replies)
Hi,
I'm new on this forum. I'm working on Solaris 11 (Express Edition) and I must install some programm created only for RedHat system (I don't want to buy or download RedHat). So I search for this tools and I find a working script for Solaris 9 and 10, but I need that for Solaris 11. So I search... (1 Reply)
Hello,
I am trying to install Nmap on my Solaris machine. I got errors at the very last of "make" command though. Could someone point me out what I am lacking?
Thank you!
Nmap version: 5.50 (nmap-5.50.tar.bz2)
Solaris version (cat /etc/release):
Error message ( run "./configure &&... (0 Replies)
Hello All.
Really a newbie to Linux/Unix. Trying to get into Linux. Using XP PE currently. Installed cygwin and trying to intall cygwin-x. Everything else is setup nice but i can't seem to install these two packages (without whom xwin won't start)
1. xorg-x11-f100
2. xorg-x11-fnts
Tried the... (1 Reply)
