So the system is now installed on c1t0025385971B16535d0 (using whole disk), and zpool import complains of that same disk being part of fido zpool which contains the same device c1t0025385971B16535d0 ?
This is quite strange.
Can we see the output of :
Also format command and print partitions of that disk would be helpful.
I completely reinstalled OmniOS, and I was able to replicate the issue with these steps:
- Install a second NVMe drive
- Install FreeBSD on that and boot from it
- Boot again, this time from OmniOS
- Import the FreeBSD pool (on second NVMe)
- Poweroff without exporting it
- Remove FreeBSD NVMe from server
- Boot from OmniOS
issue,
I had a zpool which was full
pool_temp1 199G 197G 1.56G 99% ONLINE -
pool_temp2 199G 196G 3.09G 98% ONLINE -
as you can see, full
so I replaced with a larger disk.
zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0... (2 Replies)
I have a single zpool with 3 2-way mirrors ( 3 x 2 way vdevs) it has a degraded disk in mirror-2, I know I can suffer a single drive failure, but looking at this how many drive failures can this suffer before it is no good? On the face of it, I thought that I could lose a further 2 drives in each... (4 Replies)
A backup/clone script of ours was recently ran. It normally only clones the rpool and renames in rpoolA. Something must've changed as it found another one of our pools that it shouldn't have. It exported that pool unbeknownst to us. Later on when a coworker realized the other pool was missing he... (2 Replies)
Hi,
Quick question.
I have a data zpool that consists of 1 disk.
pool: data
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
c0t50002AC0014B06BEd0 ONLINE... (2 Replies)
Hi Guys,
I have a single ZFS pool with 2 disk which is mirrored if i create a new BE with lucreate should i specify which disk where the new BE should be created? (7 Replies)
Hi guys, I appreciate any help in this regard, we have lost sensitive data in the company.
One box with 2 disk mirrored and a 3ware controller handling 13 disks in a raidz2 pool. Suddenly the box restart and keeps "Reading ZFS config" for hours.
Unplugging disk by disk we isolate the disk... (3 Replies)
I am trying to test simple zfs functionality on a FreeBSD 8.2 VM. When I try to run a 'zpool create' I receive the following error:
# zpool create zfspool /dev/da0s1a
cannot create 'zfspool': no such pool or dataset
# zpool create zfspool /dev/da0
cannot create 'zfspool': no such pool or... (3 Replies)
Hello, I have a problem on my backup server. I lost my system hdd and my separate ZIL device while the system crashs and now I'm in trouble. The old system was running under the least version of osol/dev (snv_134) with zfs v22.
After the server crashs I was very optimistic of solving the problems... (2 Replies)
# zpool import
pool: emcpool1
id: 5596268873059055768
state: UNAVAIL
status: One or more devices are missing from the system.
action: The pool cannot be imported. Attach the missing
devices and try again.
see: Sun Message ID: ZFS-8000-3C
config:
emcpool1 ... (7 Replies)
Previously , i remove the disk by
#vxdg -g testdg -k rmdisk testdg02
But i got error when i -k adddisk
bash-2.03# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 auto:none - - online invalid
c0t1d0s2 auto:none ... (1 Reply)