9 More Discussions You Might Find Interesting
1. Solaris
Hi,
Recently we have new server T5 Oracle. We set up it for our database. For out database files we set one zfs filesystem. When i use iostat -xc the output as below. As you see the value for vdc4 is quite high.
extended device statistics cpu
device ... (32 Replies)
Discussion started by: tharmendran
32 Replies
2. Emergency UNIX and Linux Support
Hi All,
I have Solaris-10 configured with two non-global zones. All file-systems are mounted on global zone and data file-systems are mounted on non-global zone as lofs.
I have added 4 luns of 100 GB each and still not able to extend a file-system. This is production server, so I can not... (5 Replies)
Discussion started by: solaris_1977
5 Replies
3. AIX
Hi Gurus,
I have Aix 5.3 server and would like to extend the following filesystem.
Filesystem GB blocks Free %Used Iused %Iused Mounted on
/dev/lv_mecdr 120.00 12.04 90% 560973 14% /home/mecdrBut there's only 16G for the VG, may be i can expand it... (11 Replies)
Discussion started by: thepurple
11 Replies
4. Solaris
Hello
I need to expand a filesystem is full, but I understand that for this I need a volume manager like SVM or Veritas. I have installed solaris 10 but I give it a metastat and tells me there is no database, as if the installation does not have the sudmirrors attachments.
The filesystem... (1 Reply)
Discussion started by: cata
1 Replies
5. Solaris
Hi all,
currently , my root filesystem already reach 90 ++%
I already add more cylinder in the root partition as below
Part Tag Flag Cylinders Size Blocks
0 root wm 67 - 5086 38.46GB (5020/0/0) 80646300
1 swap wu 1 - ... (11 Replies)
Discussion started by: SmartAntz
11 Replies
6. Filesystems, Disks and Memory
OK I'm sure this question has been posed far too many times.
I have solaris 10 x86 with NO Veritas or Disksuite filesystems. Below is the output of df -k
# df -k
Filesystem kbytes used avail capacity Mounted on
/ 10485760 547513 9317128 6% /
/dev... (1 Reply)
Discussion started by: jackiebaron
1 Replies
7. Solaris
I am running solaris 10 with Veritas. I want to extend a filesystem. It's an oracle partition (/ora12). How can I find out if there is space available to expand the filesystem and then how does one extend it.
I'm from the HPUX world and so LVM was always how I did things.
Thanks
jackie (5 Replies)
Discussion started by: jackiebaron
5 Replies
8. AIX
Hi Everybody,
Is it possible to extend a Filesystem by adding a new LV that exist on different VG to this Filesystem?
Thanks in advance. (6 Replies)
Discussion started by: aldowsary
6 Replies
9. Filesystems, Disks and Memory
How can extend /usr filesystem in hp-ux 11.11 (I'm not using online JFS) ? (0 Replies)
Discussion started by: pedro_lezaeta
0 Replies
ZFS-FUSE(8) [FIXME: manual] ZFS-FUSE(8)
NAME
zfs-fuse - ZFS filesystem daemon
SYNOPSIS
zfs-fuse [--pidfile filename] [--no-daemon] [--no-kstat-mount] [--disable-block-cache] [--disable-page-cache] [--fuse-attr-timeout SECONDS]
[--fuse-entry-timeout SECONDS] [--log-uberblocks] [--max-arc-size MB] [--fuse-mount-options OPT,OPT,OPT...]
[--min-uberblock-txg MIN] [--stack-size=size] [--enable-xattr] [--help]
DESCRIPTION
This manual page documents briefly the zfs-fuse command.
zfs-fuse is a daemon which provides support for the ZFS filesystem, via fuse. Ordinarily this daemon will be invoked from system boot
scripts.
OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included
below. For a complete description, see the Info files.
-h --help
Show summary of options.
-p filename --pidfile filename
Write the daemon's PID to filename after daemonizing. Ignored if --no-daemon is passed. filename should be a fully-qualified path.
-n --no-daemon
Stay in foreground, don't daemonize.
--no-kstat-mount
Do not mount kstats in /zfs-kstat
--disable-block-cache
Enable direct I/O for disk operations. Completely disables caching reads and writes in the kernel block cache. Breaks mmap() in ZFS
datasets too.
--disable-page-cache
Disable the page cache for files residing within ZFS filesystems. Not recommended as it slows down I/O operations considerably.
-a SECONDS --fuse-attr-timeout SECONDS
Sets timeout for caching FUSE attributes in kernel. Defaults to 0.0. Higher values give a 40% performance boost.
-e SECONDS --fuse-entry-timeout SECONDS
Sets timeout for caching FUSE entries in kernel. Defaults to 0.0. Higher values give a 10000% performance boost but cause file
permission checking security issues.
--log-uberblocks
Logs uberblocks of any mounted filesystem to syslog
-m MB --max-arc-size MB
Forces the maximum ARC size (in megabytes). Range: 16 to 16384.
-o OPT... --fuse-mount-options OPT,OPT,OPT...
Sets FUSE mount options for all filesystems. Format: comma-separated string of characters.
-u MIN --min-uberblock-txg MIN
Skips uberblocks with a TXG < MIN when mounting any fs
-v MB --vdev-cache-size MB
adjust the size of the vdev cache. Default : 10
--zfs-prefetch-disable
Disable the high level prefetch cache in zfs. This thing can eat up to 150 Mb of ram, maybe more
--stack-size=size
Limit the stack size of threads (in kb). default : no limit (8 Mb for linux)
-x --enable-xattr
Enable support for extended attributes. Not generally recommended because it currently has a significant performance penalty for many
small IOPS
-h --help
Show this usage summary.
REMARKS ON PRECEDENCE
Note that the parameters passed on the command line take precedence over those supplied through /etc/zfs/zfsrc.
BUGS
/CAVEATS
The path to the configuration file (/etc/zfs/zfsrc) cannot at this time be configured.
Most existing packages suggest settings can be set at the top of their init script. These get frequently overridden by a (distribution
specific) /etc/default/zfs-fuse file, if it exists. Be sure to look at these places if you want your changes to options to take effect.
The /etc/zfs/zfsrc is going to be the recommended approach in the future. So, packagers, please refrain from passing commandline parameters
within the initscript (except for --pid-file).
SEE ALSO
zfs (8), zpool (8), zdb(8), zstreamdump(8), /etc/zfs/zfsrc
AUTHOR
This manual page was written by Bryan Donlan bdonlan@gmail.com for the Debian(TM) system (but may be used by others). Permission is granted
to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by
the Free Software Foundation, or the Common Development and Distribution License.
Revised by Seth Heeren zfs-fuse@sehe.nl
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL. The text of the
Common Development and Distribution Licence may be found at /usr/share/doc/zfs-fuse/copyright
COPYRIGHT
Copyright (C) 2010 Bryan Donlan
[FIXME: source] 2010-06-09 ZFS-FUSE(8)