hicksd8, could u recommend me any liveCD, wich supports SPARC cpu, memory?
Google recommended me this product: system-rescue-cd.org/SystemRescueCd_for_Sparc/
tnx in advise
___ upd: sparc 240 does not support external usb cdrom pls kill me someone)
___upd2. ok, now im doing flar archive of OS. and later will try to recover a new server from the flar archive which will be located on the external hdd drive
If you have the installation media for the Solaris 10 version that you are running then you can:
to boot into single user running off the DVD. From there you can mount hard disk filesystems (typically under /a on the DVD) and mount recovery archive tape/disk (typically under /mnt). That way you can manipulate/edit a hard disk root filesystem to make it boot. (Read again those links I posted of previous threads which explains all this.)
Yes, you can use flarcreate (aka flash) to backup, or fssnap & ufsdump for backup.
I don't remember ever connecting an external USB drive to a system booted single user from DVD but I don't see why it wouldn't work.
If you have the installation media for the Solaris 10 version that you are running then you can:
mr. hicksd8, as I said I've created icr001.flar archive.
Now its located on my External USB HDD, NFS and FTP as well.
My actions:
1) ok> boot net - install
2) configuring net, dns, etc...
3) reached the “Solaris Interactive Installation” part, and selected “Flash”.
4) trying to recovery via NFS:
Could not find archive
5) trying to recovery via FTP:
same ERROR: Could not find archive
What else can I do?
ps. there are another methods available:
Thinking about "Local Device" method: But not sure, how to mount external usb HDD, or where do I need to place/locate my icr001.flar image in the internal/local hdd?
Does the network interface configure correctly? Is there a DHCP server supplying the parameters needed?
When you try to mount with a nodename "tjk-netshare" is there a method to resolve that address? Or should you substitute tjk-netshare's ip address instead?
Have you properly shared the NFS handle on the node you are trying to reach? (assuming it is on the same subset)
Does the network interface configure correctly? Is there a DHCP server supplying the parameters needed?
Network configured correctly.
To check, that problem not in the 'network', i wrote wrong ip/hostname of FTP and system warned me: " ERROR: Could not connect to host'.
When i wrote right hostname/ip, but wrong ftp password, system warned me: 'Could not authenticate'
When I wrote wrong ip NFS location, system warned me: " ERROR: Could not mount archive"
Quote:
When you try to mount with a nodename "tjk-netshare" is there a method to resolve that address? Or should you substitute tjk-netshare's ip address instead?
As I said, I tryed both of them hostname and ip
Quote:
Have you properly shared the NFS handle on the node you are trying to reach? (assuming it is on the same subset)
Yes, they are on the same subset.
I shared properly NFS. I tryed to mount from another server my NFS folder, and it mounted properly:
but can you also prove that you can access the archive. What access rights are set on the archive? Perhaps, temporarily set to 777? Try copying the archive to the local system (you can interrupt it once it starts to copy). Also check the access rights on the directory above.
This does seem like an access rights (or wrong path/filename given) issue to me; although I could be wrong.
Hi,
This command works
ggrep -v -F -x -f app1.txt app2.txt But, I don't have ggrep on SunOS Sparc so I tried using grep instead but it errors out
grep: illegal option -- F bash-2.03$ uname -a
SunOS mymac 5.8 Generic_Virtual sun4v sparc sun4v Can you help me with a grep command that... (6 Replies)
Hi experts,
This is a production server.
Host information's are below
SunOS hostname_srv 5.10 Generic_150400-09 sun4v sparc sun4v
Now issue with ntp service, This host have zone in it with 9 hosts, Every hosts have ntp service issue. While i check for the service status it's in... (3 Replies)
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Hi, I have two sets of image files. Both sets have names A to Z but set 1 ends with .cdt.png and set 2 ends with .matrix.png. I want set 1 to match with set 2 if the names match (i.e. A.cdt.png will match with A.matrix.png) and with the convert image tool (program for images), it will merge the... (6 Replies)
Disk is: c0t1d0
partition> print
Current partition table (original):
Total disk cylinders available: 38307 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 - 38306 74.53GB (38307/0/0) 156292560
1 unassigned... (3 Replies)
Hi,
I want to encrypt a unix file using the des3 algorithm. Seems that there are no standard unix utilities readily available. Can you please suggest how I can encrypt a unix file using des3 ? (2 Replies)
Hi, (HP-UX 11.11)
I need to create a tape image of an igniteUX image created on our igniteUX server.
That is to say. I have a "Online" image of the igniteUX of the targeted system but I now need to copy it to a useable TAPE (igniteUX) image so i can build an other server from it that is not... (3 Replies)