Ok, it seems that c0t0d0 disk is not in use.
One check is missing:
should not list the c0t0d0.
The next challenge is to find the physical disk that is c0t0d0.
The d30 and d20 mirrors are degraded, because the submirrors d32 and d22 failed. Obviously because the c0t2d0 disk failed. But they still work because the other submirrors are okay.
I would surface-scan the disk c0t2d0, by means of format, pick the c0t2d0, analyze, read.
If this passes without errors, I would resync them, e.g. by the commands
Then metastat should show they are resyncing (data is restored from the other submirror).
If all submirrors are okay then the full redundancy is restored, and the mirrors' state become okay.
Hi All
BAsed on the below I would like to verifu two things
(1) The udnerlying mirroris for '/mnt' na dit onlcy contaisne 1 sub-mirror, with one sliceon is one disk and hence, data loss on the mount point (the mount point, '/mnt' is backed up)
(2) the Procedure for renewal
# df -kh /mnt... (2 Replies)
I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system
and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
The following is the summarry:-
1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced.
c1t0d0 and c1t2d0 are mirrors.
c1t1d0 and c1t3d0 are mirrors.
Metadb to be deleted is in c1t2d0s7
a) Mirror d35 has 2 submirrors d38 and d39
d38 is a stripe... (0 Replies)
Hi Gurus, I've got an issue here:
(1) Hardware: Sun NetraT1, (2) OS: Solaris 10, (3) SVM
metastat shows /var having 12 GB. df shows /var having 4 GB. Real space for /var is about 4 GB since I can't move a big file to it. How is 8 GB space missing? Does /var/run swap need to account? Can I... (5 Replies)
Hi all,
we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this?
In the past we have always kept slice 7 free -... (8 Replies)
Hi All,
I have to remove the disk from SVM.
Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion.
Thanks in anticipation! (10 Replies)
Hello,
Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do...
1. Remove the db replicas from the bad disk.
2. Detach it from the mirror
3. Clear it with... (4 Replies)
I dont even know what raid level this is, but its raid 5 mirrored from the looks of it.
I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)