Solaris 10 installing on Cisco UCS doesn't see HBAs
The chassis config is right... this blade can boot to VMware ESXi and see HBAs and LUNs. Solaris isn't seeing the HBAs at all... luxadm probe returns ERROR: No Fibre Channel Adapters found. fcinfo hba-port -l returns No Adapters Found.
prtdiag -v gets me:
Code:
==== Upgradeable Slots ==============================
ID Status Type Description
--- --------- --------------- -----------------------
0 in use Unknown MLOM Slot
1 unknown Unknown Mezzanine Slot 1
I cannot find a download for drivers for UCS and Solaris, or I'd be figuring I need to stand up a jumpstart server or otherwise customize the install process. Googling turns up some old posts that seem to suggest that Solaris can be installed on this hardware. So I could use a pointer!
Last edited by rbatte1; 12-28-2016 at 08:03 AM..
Reason: Added ICODE tags
Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this:
1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image.
2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S... (0 Replies)
I am installing RHEL6 on a Cisco UCS blade and the GUI isn't showing up. Curious!!!!! I have installed it on 5 of the other blades and the GUI is there. However, there are many issues that I am having and I am going crazy with this thing. I have issues where the network adapters are not showing... (1 Reply)
I having problem connecting to a Cisco PIX
Log from IKE
# /usr/lib/inet/in.iked -f /etc/inet/ike/config -d
Jan 16 00:40:57: 2012 (+0800) *** in.iked started ***
Jan 16 00:40:57: Loading configuration...
Jan 16 00:40:57: Checking lifetimes in "nullrule"
Jan 16 00:40:57: Using default value... (0 Replies)
I am writing perl script to configure Cisco device but Variables inside Net::Telnet::Cisco Module doesn't work and passed to device without resolving.
Please advise.
here is a sample of script:
use Net::Telnet::Cisco;
$device = "10.14.199.1";
($o1, $o2, $o3, $o4) = split(/\./,$device);... (5 Replies)
Hi!
I am using Slackware 12.1 and I have a question regarding LaTeX.
I am trying to use the package ucs, so that I can write in greek, but with no success. In Debian there is a package latex-ucs.deb that does the trick. Is there something similar in Slackware?
Thanks in advance (1 Reply)
Hi,
I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings.
Do I need... (6 Replies)
