Login or Register to Ask a Question and Join Our Community


Solaris

Where are my other disks on T5220 ?

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Where are my other disks on T5220 ?
# 15  
Old 12-19-2016
So can a disk failure on an internal Storagetek HBA array be monitored/reported from Solaris 11?
# 16  
Old 12-19-2016
Not without the proper software... Which is downloadable here:

Downloads for Sun StorageTek* SAS RAID HBA, Internal

But there is no update for Solaris 11. I would try the Solaris 10 packages in Solaris 11 and see if it works...

Hth,
DN2
# 17  
Old 12-19-2016
Seems like Solaris-11 is not compatible/supported for this software. I have installed as per your downloadable link, but it is generating dump. If this is so, I need not go back and remove both SAS cables and plug them on MB "somewhere" and that will bypass RAID controller.
Code:
root@predb-dev2:/# /opt/StorMan/arcconf
  | UCLI |  Sun uniform command line interface
  | UCLI |  Version 6.40 (B17557)
  | UCLI |  (C) Adaptec 2003-2009
  | UCLI |  All Rights Reserved
 COPYBACK      | toggles controller copy back mode
 CREATE        | creates a logical device
 DATASCRUB     | toggles the controller background consistency check mode
 DELETE        | deletes one or more logical devices
 FAILOVER      | toggles the controller autotomatic failover mode
 GETCONFIG     | prints controller information
 GETLOGS       | gets controller log information
 GETSTATUS     | displays the status of running tasks
 GETVERSION    | prints version information for all controllers
 IDENTIFY      | blinks LEDS on device(s) connected to a controller
 KEY           | installs a Feature Key onto a controller
 MODIFY        | performs RAID Level Migration or Online Capacity Expansion
 RESCAN        | checks for new or removed drives
 ROMUPDATE     | updates controller firmware
 SETALARM      | controls the controller alarm, if present
 SETCONFIG     | restores the default configuration
 SETCACHE      | adjusts physical or logical device cache mode
 SETNAME       | renames a logical device given its logical device number
 SETPRIORITY   | changes specific or global task priority
 SETSTATE      | manually sets the state of a physical or logical device
 TASK          | performs a task such as build/verify on a physical or logical device
root@predb-dev2:/#
root@predb-dev2:/# /opt/StorMan/arcconf getconfig 1 PD
Bus Error (core dumped)
root@predb-dev2:/#

# 18  
Old 12-19-2016
Or install Solaris 10 on that server Smilie

Btw. the onboard SAS connectors are between the PCI and memory slots, next to the power supplys.

Also, have you checked that the agent is running? I think it has to be enabled after installation:
Code:
# svcadm enable ADPTstor_agent

After that, check your last command again.
Last edited by DukeNuke2; 12-19-2016 at 08:00 PM..
This User Gave Thanks to DukeNuke2 For This Post:
solaris_1977
# 19  
Old 12-19-2016
No luck. I tried refreshing and restarting that. Still it is generating core dump.

Let me go inside DC and try to find those two slots, where I can plug in both cables.
-------------------------------------------------------------------------------------------------------
I am able to plug both cables to correct controller and install OS. So, I am back to, whatever I planned to do initially. But I had lot of learning on the way. Thanks a lot guys.
Last edited by solaris_1977; 12-19-2016 at 10:03 PM.. Reason: Final status
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Storage issue on T5220

We have one box T5220 which was assigned 2x100G Luns but i have a strange problem if i use powermt display it only shows me one card but cfgadm, fcinfo commands shows 2 dual port cards as up. What could be the reason for it. I already did a re-configure reboot but that didn't help. Can anyone help... (1 Reply)
Discussion started by: fugitive
1 Replies

2. Solaris

T5220

Hello guys, can anyone give me some advice on how to perform clean installation of Solaris 10 on T5220 ? I am connected with serial management port on the machine, i have the ok promt and now i should eject the dvdrom to insert Solaris dvd into and start the clean install. So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies

3. Solaris

T5220

Hi Guys and Gals, Wondering if anyone could help me, tricky one this. Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc. But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Discussion started by: callmebob
1 Replies

4. Solaris

Jumpstart Issues With T5220

I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4). The Facts: V210 - Solaris 10 (September 2010 Release / not patched) T5220's - Archive's created using prior (unknown) version of solaris 10. Flar -i <archive name> shows the... (6 Replies)
Discussion started by: Celtic_Monkey
6 Replies

5. Solaris

Set up new T5220 remotely

I have a new T5220 racked at our remote office and the guys who racked it does not know how to configure the SP on the system .. is there any way i can do it remotely ? (1 Reply)
Discussion started by: fugitive
1 Replies

6. Solaris

T5220 server

Hi, We have two T5220 servers in our datacentre one server is showing 64 processors online and another showing 32 processors online two are newly purchased, there is no hardware faults in this server one server has 64gb memory and it shows 64 processors, and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies

7. Solaris

LDOMs on T5220

We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid? I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Discussion started by: JerryHone
9 Replies

8. Solaris

SC on T5220 not responding

Hi, SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc sc> console -f Enter #. to return to ALOM. (2 Replies)
Discussion started by: fugitive
2 Replies

9. Solaris

ILOM and sc on T5220

I 've 2 different T5220 and both are showing different prompts when i ssh to the console. 1. Shows sc> ALOM 2. Shows -> ILOM as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ? and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies

10. Solaris

kstat on T5220

We used kstat on netra240/440 to check if the link is full duplex. So we do something like: bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2 2 The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems. However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies
Login or Register to Ask a Question