10 More Discussions You Might Find Interesting
1. Hardware
I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on... (0 Replies)
Discussion started by: powwm
0 Replies
2. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
3. Solaris
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies
4. SCO
hi all,
how i can configure a DAT drive usb under SCO os 6.0.0
thank you (0 Replies)
Discussion started by: lid-j-one
0 Replies
5. AIX
Hello, we are trying to install an HP DAT drive on an IBM AIX RS6000 server. We have attached the SCSI connection and power cylced the unit, but still cannot see the device in smit.
I am only a couple months into AIX, so I am very green! The server we are working on is in a lab environment,... (2 Replies)
Discussion started by: dayinthelife
2 Replies
6. SCO
my server os version is openserver 5.0.6.from past few days it is giving problem while taking backup.it is giving error such that "TAPE WRITE ERROR".anyone can help to come out of this. (3 Replies)
Discussion started by: prakrithi
3 Replies
7. SCO
I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller .
how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6.
Plz help with any idea
karzon (1 Reply)
Discussion started by: karzon
1 Replies
8. SCO
I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
Discussion started by: hafizurr
3 Replies
9. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
10. UNIX for Advanced & Expert Users
Ok guys I need all the help I can get right now. I have a Ultra 60 sun server and I can't get a ultra 3 scsi card to work in it . When I install the card the system will not boot correctly and I come up with errors that say:
pcipsy0: This is block
Can someone please help me. I trying to hook... (2 Replies)
Discussion started by: aojmoj
2 Replies