Jumpstart process can�t find tape device

10 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. AIX

Backup to a remote tape device. Is it possible?

Hi all The situation is as follows: We need to take an mksysb image from an AIX 6.1 server. From some reason (irrelevant to this discussion) this server does not have access to a local CD-ROM or a tape drive. We do have another server with AIX 6.1 (but different technology level) which got access...

3. AIX

Tape device temporarily unavailable

Hi All, After (by accident) closing a session that ran a restore command I can not access the tape drive anymore. I get the following error: # tctl -f /dev/rmt0 rewind /dev/rmt0: Resource temporarily unavailable But I cannot find any processes associated with the tape device: # ps...

4. SCO

SCO UNIX DAT Tape Device

Looking for specifically naming convention for a tape device for SCO Unix What full system backup command should I use for SCO UNIX

5. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

6. UNIX for Dummies Questions & Answers

How to change tape device name.

I disconected external device which was configured as rmt0. When I connect it again and run cfgmgr device name has changed (internal drive which was rmt1 is now rmt0 and external drive was rmt0 and is rmt1) and I dont know how to back it out. The thing is that for all backups I use new modell...

7. Solaris

flarcreate to remote tape device

Hi, Someone knows hot to create a flash archive to a remote tape device? Here is my try: $flarcreate -n nereus -S -t lisdev:/dev/rmt/1n WARNING: hash generation disabled when using tape (-t) current filter settings Creating the archive... ERROR: Unable to work archive. Regards

8. UNIX for Advanced & Expert Users

tape device

Hi, 1- how can I find my tape device on my server ? 2-I have a backup of a data base distributed on several file system. How using tar -x can I extract from tape to each apropriate file system ? For exemple the data base was on /d1 ; /d2 ; and /d3. Now I cd to which /dn and use tar -xvf /dev/nm0...

9. UNIX for Dummies Questions & Answers

Is it possible to ufsdump to a file instead of a tape device?

Eh... what the title says. :)

10. Programming

tape device

Hi, I have problem detecting my tape drive. In SAM, once I click on the either Automated Backups or Interactive Backup and Recovery icon, the screen will prompt searching for device and ..... nothing appears in the list. In the end, I have the kill the SAM process and reboot the system and...

LEARN ABOUT DEBIAN

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently	being maintained by Robert Nelson <robertnelson@users.sourceforge.net> as part of the 'mtx' suite of programs. The
       'mtx' home page is http://mtx.sourceforge.net  and  the	actual	code  is  currently  available	there  and  via  SVN  from  http://source-
       forge.net/projects/mtx.

SEE ALSO

       mt(1),mtx(1),scsitape(1),scsieject(1),loaderinfo(1)

								    TAPEINFO1.0 						       TAPEINFO(1)

Solaris