Login or Register to Ask a Question and Join Our Community


Solaris

Jumpstart process canīt find tape device

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Jumpstart process canīt find tape device
# 1  
Old 04-11-2006
Error Jumpstart process canīt find tape device
Hi to all,

Iīm recovering a Solaris box trough jumpstart with restore of a flash archive on tape. The tape device is recognized by OBP in probe-scsi-all and by the operating system that is instaled on that box where i want to restore flar as /dev/rmt/2. But when a i boot with " (0) ok boot net - install " the jumpstart process canīt find that device (/dev/rmt/2) where i have the flar to restore. I have already try with /dev/rmt/0 and 1, and have the same error, "canīt find path..." . Any ideas?

Thanks in advance. Regards.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon... (4 Replies)
Discussion started by: anuragr
4 Replies

2. AIX

Backup to a remote tape device. Is it possible?

Hi all The situation is as follows: We need to take an mksysb image from an AIX 6.1 server. From some reason (irrelevant to this discussion) this server does not have access to a local CD-ROM or a tape drive. We do have another server with AIX 6.1 (but different technology level) which got access... (1 Reply)
Discussion started by: abohmeed
1 Replies

3. AIX

Tape device temporarily unavailable

Hi All, After (by accident) closing a session that ran a restore command I can not access the tape drive anymore. I get the following error: # tctl -f /dev/rmt0 rewind /dev/rmt0: Resource temporarily unavailable But I cannot find any processes associated with the tape device: # ps... (2 Replies)
Discussion started by: petervg
2 Replies

4. SCO

SCO UNIX DAT Tape Device

Looking for specifically naming convention for a tape device for SCO Unix What full system backup command should I use for SCO UNIX (1 Reply)
Discussion started by: jedimaster
1 Replies

5. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570? (4 Replies)
Discussion started by: rainbow_bean
4 Replies

6. UNIX for Dummies Questions & Answers

How to change tape device name.

I disconected external device which was configured as rmt0. When I connect it again and run cfgmgr device name has changed (internal drive which was rmt1 is now rmt0 and external drive was rmt0 and is rmt1) and I dont know how to back it out. The thing is that for all backups I use new modell... (2 Replies)
Discussion started by: fraydey
2 Replies

7. Solaris

flarcreate to remote tape device

Hi, Someone knows hot to create a flash archive to a remote tape device? Here is my try: $flarcreate -n nereus -S -t lisdev:/dev/rmt/1n WARNING: hash generation disabled when using tape (-t) current filter settings Creating the archive... ERROR: Unable to work archive. Regards (4 Replies)
Discussion started by: spacewalker
4 Replies

8. UNIX for Advanced & Expert Users

tape device

Hi, 1- how can I find my tape device on my server ? 2-I have a backup of a data base distributed on several file system. How using tar -x can I extract from tape to each apropriate file system ? For exemple the data base was on /d1 ; /d2 ; and /d3. Now I cd to which /dn and use tar -xvf /dev/nm0... (0 Replies)
Discussion started by: big123456
0 Replies

9. UNIX for Dummies Questions & Answers

Is it possible to ufsdump to a file instead of a tape device?

Eh... what the title says. :) (8 Replies)
Discussion started by: PSC
8 Replies

10. Programming

tape device

Hi, I have problem detecting my tape drive. In SAM, once I click on the either Automated Backups or Interactive Backup and Recovery icon, the screen will prompt searching for device and ..... nothing appears in the list. In the end, I have the kill the SAM process and reboot the system and... (1 Reply)
Discussion started by: jennifer
1 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

dds-dd

dds-dd(1)						      General Commands Manual							 dds-dd(1)

NAME

       dds-dd - tool to read a dds device.

SYNOPSIS

       dds-dd [ -f device ]

DESCRIPTION

       dds-dd  reads  a  dds  tape devices (DAT). Every block is read and written to stdout. A tape with unknown block size or blocks of different
       size can be read.

       The default device is /dev/rmt0, which may be overridden with the environment variable TAPE, which in  turn  may  be  overridden  with  the
       -f device option. The device must be a character special file.

OPTIONS

       -f device
	      Device of the tape archive (default is /dev/rmt0).  Must be a character special file connected to a dds tape device.

       -V,--version
	      Print the version number of mt-dds to stderr and exit immediately.

       --help print some screens of online help with examples through a pager and exit immediately.

EXAMPLES

       Example: Read the tape and make a listing:
		 dds-dd | tar ft -

       Example: Read the tape and make a listing:
		 dds-dd | cpio -it

ENVIRONMENT

       The environment variable TAPE overrides the default tape device /dev/rmt0.

       SEE ALSO
	      dds2tar(1), dds2index(1), mt(1), tar(1)

HISTORY

       This program was created to use it in conjunction with dds2tar.

AUTHOR

       J"org Weule (weule@cs.uni-duesseldorf.de), Phone +49 211 751409.  This software is available at ftp.uni-duesseldorf.de:/pub/unix/apollo

									2.4								 dds-dd(1)