I have a laptop I'm setting up to multi-boot between Win 7, Solaris 11, Ubuntu 14.04, and CentOS 7. I have a common FAT32 partition for all of them to save data to. I'm less familiar with Solaris and haven't used it in years, and am really struggling :-)
'format' says:
I cannot for the life of me find the correct device ID for the FAT32 slice. /dev/dsk/c2t0d0p0:4, c2t0d0p4:1, c2t0d0p4:e, nothing. Under Linux, it's /dev/sda10
In Solaris, it would normally be /dev/dsk/c2t0d0 (Controller 2, Target 0, Disk 0) this is then followed by the Slice id - which can be 0 to 7, with 2 usually being the whole disk and called backup.
Here it would look like you will use /dev/dsk/c2t0d0s0
If you are looking at an other partition on the disk that is NFS exported or you want to mount it directly, there are several things to check.
It may show as being on an other controller.
It may need an other machine available to serve the mount.
Regards
Gull04
Last edited by gull04; 03-09-2016 at 11:40 AM..
Reason: More Info
In Solaris, it would normally be /dev/dsk/c2t0d0 (Controller 2, Target 0, Disk 0) this is then followed by the Slice id - which can be 0 to 7, with 2 usually being the whole disk and called backup.
Err, the slices live in the ZFS pool. 's' is for slice, 'p' is for partition. This is a partition, not a slice ;-)
Quote:
If you are looking at an other partition on the disk that is NFS exported or you want to mount it directly, there are several things to check.
It may show as being on an other controller.
It may need an other machine available to serve the mount.
There's a single disk and no NFS. There are no other controllers or targets.
That's the ninth partition indeed. Don't append :x, that used to be a hack when Solaris wasn't providing a device for extended partition but this is no more needed with Solaris 11:
Hi,
I need to mount the device from this device
# fdisk -l
.
.
.
Disk /dev/sdas: 2000.4 GB, 2000365289472 bytes
255 heads, 63 sectors/track, 243197 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size... (0 Replies)
hi all
while formatting hard disk i am getting following error.
Partition 1 ends at 266338338
It must be between 34 and 143374704.
label error: EFI Labels do not support overlapping partitions
Partition 8 overlaps partition 1.
Warning: error writing EFI.
Label failed.
I have formatted the... (2 Replies)
I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570? (4 Replies)
We are intending to protect a set of user specified files using LVM mirroring where the protected space on which the user files are stored is mirrored on an LV on a different disk. Our problem is that for a user with a custom layout has installed linux with 2 partitons for swap and / and there is... (0 Replies)
Hello,
I use Sun Solaris 10 under a x86 computer, and I want to mount a Fat32 partition who are stored in the same disk with the UFS filesystem.
But, before mount this partition, I need to know is location in /dev/dsk
Because there are a lot of file "c0t0d0" etc..., and I didn't find my... (4 Replies)