Solaris

boot cdrom

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.01.20 12:25:28 =~=~=~=~=~=~=~=~=~=~=~=

{0} ok 
{0} ok probe-scsi-all
/pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2
  Unit 0   Removable Read Only device    AMI     Virtual CDROM   1.00

/pci@400/pci@2/pci@0/pci@4/scsi@0

FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.05.00.00

Target 9 
  Unit 0   Disk   HITACHI  H109030SESUN300G A690    585937500 Blocks, 300 GB
  SASDeviceName 5000cca06e1fe978  SASAddress 5000cca06e1fe979  PhyNum 0 
Target a 
  Unit 0   Removable Read Only device   TEAC     DV-W28S-B        AT11
  SATA device  PhyNum 6 

/pci@400/pci@1/pci@0/pci@4/scsi@0

FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.05.00.00

Target 9 
  Unit 0   Disk   HITACHI  H109030SESUN300G A690    585937500 Blocks, 300 GB
  SASDeviceName 5000cca06e1fe3c8  SASAddress 5000cca06e1fe3c9  PhyNum 0 

{0} ok 
{0} ok boot cdrom
Boot device: /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6  File and args: 
|
/
-
\
|
/
-
\
|
/
-
\
|
/
-
\
|
/
-
\
|
/
-
\
|
/
-
\
|
/
-
|Configuring devices.
/-Using RPC Bootparams for network configuration information.
Reading ZFS config: *done.
Using local console
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...
























Select a Language

   0. English
   1. French
   2. German
   3. Italian
   4. Japanese
   5. Korean
   6. Simplified Chinese
   7. Spanish
   8. Swedish
   9. Traditional Chinese

Please make a choice (0 - 9), or press h or ? for help: 0

Completing system identification...

in.rdisc: No interfaces up
- The Solaris Installation Program ---------------------------------------------
  The Solaris installation program is divided into a series of short sections

  where you'll be prompted to provide information for the installation. At

  the end of each section, you'll be able to change the selections you've

  made before continuing.


  About navigation...- The mouse cannot be used- If your keyboard does not have function keys, or they do notrespond, press ESC; the legend at the bottom of the screenwill change to show the ESC keys to use for navigation.-------------------------------------------------------------------------------- F2_Continue    F6_Help
    Esc-2_Continue    Esc-6_Help
- Identify This System ---------------------------------------------------------
  On the next screens, you must identify this system as networked or

  non-networked, and set the default time zone and date/time.


  If this system is networked, the software will try to find the information

  it needs to identify your system; you will be prompted to supply any

  information it cannot find.


  > To begin identifying this system, press F2.-------------------------------------------------------------------------------- Esc-2_Continue    Esc-6_Help
    Esc-2_Continue    Esc-6_Help
- Host Name --------------------------------------------------------------------
  Enter the host name which identifies this system on the network.  The name

  must be unique within your domain; creating a duplicate host name will cause

  problems on the network after you install Solaris.


  A host name must have at least one character; it can contain letters,

  digits, and minus signs (-).Host name                                 --------------------------------------------------------------------------------    Esc-2_Continue    Esc-6_Helpopale     rubis    Esc-2_Continue    Esc-6_Helprubis- Confirm Information ----------------------------------------------------------
  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.Host name: rubis--------------------------------------------------------------------------------    Esc-2_Continue    Esc-4_Change    Esc-6_Help
    Esc-2_Continue    Esc-4_Change    Esc-6_Help
Just a moment...


 Starting remote procedure call (RPC) services: done.
- Time Zone --------------------------------------------------------------------
  On this screen you must specify your default time zone.  You can specify a

  time zone in three ways:  select one of the continents or oceans from the

  list, select other - offset from GMT, or other - specify time zone file.


  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].Continents and Oceans----------------------------------[ ]Africa[ ] Americas[ ] Antarctica[ ] Arctic Ocean[ ] Asia[ ] Atlantic Ocean[ ] Australia[ ] Europe[ ] Indian Ocean[ ] Pacific Ocean[ ] other - offset from GMT[ ] other - specify time zone file--------------------------------------------------------------------------------    Esc-2_Continue    Esc-6_Help[ ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ] ]
 ][X    Esc-2_Continue    Esc-6_Help- Offset From GMT --------------------------------------------------------------
  Specify the number of hours of difference between Greenwich Mean Time (also

  called Coordinated Universal Time) and your time zone.  If you are west of

  Greenwich, England, enter a positive number 12 through 1; if you are east of

  Greenwich, England enter a negative number -1 through -13.   --------------------------------------------------------------------------------    Esc-2_Continue    Esc-5_Cancel    Esc-6_Help3    Esc-2_Continue    Esc-5_Cancel    Esc-6_Help3  - Date and Time ----------------------------------------------------------------
  > Accept the default date and time or enter

    new values.


  Date and time: 2016-01-20 12:28Year   (4 digits) : 2016

    Month  (1-12)     : 01

    Day    (1-31)     : 20

    Hour   (0-23)     : 12

    Minute (0-59)     : 282016--------------------------------------------------------------------------------    Esc-2_Continue    Esc-6_Help    Esc-2_Continue    Esc-6_Help2016- Confirm Information ----------------------------------------------------------
  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.Time zone: <GMT+3>+3

    Date and time: 2016-01-20 12:28:00--------------------------------------------------------------------------------    Esc-2_Continue    Esc-4_Change    Esc-6_Help
    Esc-2_Continue    Esc-4_Change    Esc-6_Help
Please wait...


 - Root Password ----------------------------------------------------------------
  Please enter the root password for this system.


  The root password may contain alphanumeric and special characters.  For

  security, the password will not be displayed on the screen as you type it.


  > If you do not want a root password, leave both entries blank.Root password:                  Root password:--------------------------------------------------------------------------------    Esc-2_Continue    Esc-6_Help****************                    Esc-2_Continue    Esc-6_Help********    Esc-2_Continue    Esc-6_Help********System identification is completed.
- Identify This System ---------------------------------------------------------
  On the next screens, you must identify this system as networked or

  non-networked, and set the default time zone and date/time.


  If this system is networked, the software will try to find the information

  it needs to identify your system; you will be prompted to supply any

  information it cannot find.


  > To begin identifying this system, press F2.-------------------------------------------------------------------------------- F2_Continue    F6_Help
    Esc-2_Continue    Esc-6_Help
- Enabling remote services -----------------------------------------------------
  Would you like to enable network services for use by remote clients?


  Selecting "No" provides a more secure configuration in

  which Secure Shell is the only network service provided to

  remote clients.  Selecting "Yes" enables a larger set of

  services as in previous Solaris releases. If in doubt, it is

  safe to select "No" as any services can be individually enabled

  after installation.


  Note: This choice only affects initial installs. It doesn't affect upgrades.Remote services enabled-----------------------[X]Yes[ ] No--------------------------------------------------------------------------------    Esc-2_Continue    Esc-6_Help[X]
 ] 
X    Esc-2_Continue    Esc-6_HelpSystem identification complete.
Starting Solaris installation program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
- Warning ----------------------------------------------------------------------No disks found.> Check to make sure disks are cabled andpowered up.-------------------------------------------------------------------------------- F2_OK
     F2_OK
     F2_OK
Solaris installation program exited.
# 
# 
# format
Searching for disks...done
No disks found!

# 
# 
#