10 More Discussions You Might Find Interesting
1. Solaris
Hello,
I am upgrading Veritas from 5.1 to 6.0.1/6.0.5 in a Solaris 10 u8 server with OS mirrored (rpool) in zfs/zpool configuration.
I need to split it to have a quick way to backout in case of failure (make splitted mirror side bootable for a quick revert, like booting from it). I remember... (3 Replies)
Discussion started by: feroccimx
3 Replies
2. Solaris
So,
We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup
FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Discussion started by: os2mac
4 Replies
3. Solaris
Hi everyone,
I'm hoping someone can help me out here. I've googled lots and don't think I can find an easy answer to this.
We're in the process of upgrading Solaris from v10 5/08 to v10 9/10. The zpools for luns are currently at version 10, and I understand Solaris v10 9/10 has support for... (3 Replies)
Discussion started by: badoshi
3 Replies
4. Solaris
running VM server for Sparc on a Solaris 11 server. I have a Guest LDOm that had two seperate zpools running, one for the zones and one for the OS. The OS was corrupted and had to be replaced. The zones zfs file system is intact I think. I still have access to the disk and can still see it in... (3 Replies)
Discussion started by: os2mac
3 Replies
5. BSD
I am trying to test simple zfs functionality on a FreeBSD 8.2 VM. When I try to run a 'zpool create' I receive the following error:
# zpool create zfspool /dev/da0s1a
cannot create 'zfspool': no such pool or dataset
# zpool create zfspool /dev/da0
cannot create 'zfspool': no such pool or... (3 Replies)
Discussion started by: bstring
3 Replies
6. Solaris
i need how to use graphical user interface for zfs using web console ,
thanks (3 Replies)
Discussion started by: Amr
3 Replies
7. Solaris
Hi All,
I am trying to read zpool.cache file to find out pool information like pool name, devices it uses and all properties.
File seems to be in packed format.I am not sure how to unpack it.
But from opensolaris code base we can see that they have used libz for uncompromising this file, but... (0 Replies)
Discussion started by: shailesh_111
0 Replies
8. Solaris
I am using Solaris 10, and would like a web gui for mail or can replace the mail server if needed, it doesnt need to be anything elaborate, just something where i can view mail via a web browser rather than command line and hitting 'd' a 1000 times to delete all my cron job mails etc :p
I've... (8 Replies)
Discussion started by: ippy98
8 Replies
9. Solaris
All,
I am trying to get the Sun Web Console to work with ZFS and am not getting anywhere. When I first tried to get the web console https://server:6789/zfs it gave me a page can't be displayed (500 error). I've played around and performed the following and can now get it to log in and display... (7 Replies)
Discussion started by: darkoth
7 Replies
10. Solaris
Hi there,
I recently discovered the ZFS GUI and wanted to try it out. :)
The login page works and also the next page. But if I choose "ZFS Administration", the page stays blank and the browser reports an error:
Pictures:... (5 Replies)
Discussion started by: Ebbi
5 Replies
ZFS-FUSE(8) [FIXME: manual] ZFS-FUSE(8)
NAME
zfs-fuse - ZFS filesystem daemon
SYNOPSIS
zfs-fuse [--pidfile filename] [--no-daemon] [--no-kstat-mount] [--disable-block-cache] [--disable-page-cache] [--fuse-attr-timeout SECONDS]
[--fuse-entry-timeout SECONDS] [--log-uberblocks] [--max-arc-size MB] [--fuse-mount-options OPT,OPT,OPT...]
[--min-uberblock-txg MIN] [--stack-size=size] [--enable-xattr] [--help]
DESCRIPTION
This manual page documents briefly the zfs-fuse command.
zfs-fuse is a daemon which provides support for the ZFS filesystem, via fuse. Ordinarily this daemon will be invoked from system boot
scripts.
OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included
below. For a complete description, see the Info files.
-h --help
Show summary of options.
-p filename --pidfile filename
Write the daemon's PID to filename after daemonizing. Ignored if --no-daemon is passed. filename should be a fully-qualified path.
-n --no-daemon
Stay in foreground, don't daemonize.
--no-kstat-mount
Do not mount kstats in /zfs-kstat
--disable-block-cache
Enable direct I/O for disk operations. Completely disables caching reads and writes in the kernel block cache. Breaks mmap() in ZFS
datasets too.
--disable-page-cache
Disable the page cache for files residing within ZFS filesystems. Not recommended as it slows down I/O operations considerably.
-a SECONDS --fuse-attr-timeout SECONDS
Sets timeout for caching FUSE attributes in kernel. Defaults to 0.0. Higher values give a 40% performance boost.
-e SECONDS --fuse-entry-timeout SECONDS
Sets timeout for caching FUSE entries in kernel. Defaults to 0.0. Higher values give a 10000% performance boost but cause file
permission checking security issues.
--log-uberblocks
Logs uberblocks of any mounted filesystem to syslog
-m MB --max-arc-size MB
Forces the maximum ARC size (in megabytes). Range: 16 to 16384.
-o OPT... --fuse-mount-options OPT,OPT,OPT...
Sets FUSE mount options for all filesystems. Format: comma-separated string of characters.
-u MIN --min-uberblock-txg MIN
Skips uberblocks with a TXG < MIN when mounting any fs
-v MB --vdev-cache-size MB
adjust the size of the vdev cache. Default : 10
--zfs-prefetch-disable
Disable the high level prefetch cache in zfs. This thing can eat up to 150 Mb of ram, maybe more
--stack-size=size
Limit the stack size of threads (in kb). default : no limit (8 Mb for linux)
-x --enable-xattr
Enable support for extended attributes. Not generally recommended because it currently has a significant performance penalty for many
small IOPS
-h --help
Show this usage summary.
REMARKS ON PRECEDENCE
Note that the parameters passed on the command line take precedence over those supplied through /etc/zfs/zfsrc.
BUGS
/CAVEATS
The path to the configuration file (/etc/zfs/zfsrc) cannot at this time be configured.
Most existing packages suggest settings can be set at the top of their init script. These get frequently overridden by a (distribution
specific) /etc/default/zfs-fuse file, if it exists. Be sure to look at these places if you want your changes to options to take effect.
The /etc/zfs/zfsrc is going to be the recommended approach in the future. So, packagers, please refrain from passing commandline parameters
within the initscript (except for --pid-file).
SEE ALSO
zfs (8), zpool (8), zdb(8), zstreamdump(8), /etc/zfs/zfsrc
AUTHOR
This manual page was written by Bryan Donlan bdonlan@gmail.com for the Debian(TM) system (but may be used by others). Permission is granted
to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by
the Free Software Foundation, or the Common Development and Distribution License.
Revised by Seth Heeren zfs-fuse@sehe.nl
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL. The text of the
Common Development and Distribution Licence may be found at /usr/share/doc/zfs-fuse/copyright
COPYRIGHT
Copyright (C) 2010 Bryan Donlan
[FIXME: source] 2010-06-09 ZFS-FUSE(8)