Hi,
I am using sun enterprise 420R server. Problem is on the monitor i am not able to see anything. I tried Serial connection, on terminal(using serial) i could see that POST(power on start tests) tests are being done, after that "timeout waiting for arp rarp packet" message keep displaying forever and it never comes up.
Boot device is set to net.
By pressing CONTROL+B also not able to get ok prompt.
i could not disable the POST tests by pressing STOP+A.
Can anyone pls help how to change boot device to disk and how to get ok prompt.
On serial line stop+a is not working. If I remember right, a ~# should do the trick. If you are connected via a RSC card, there should be a break command from within the controller.
Also, while using serial connection, make sure there is no monitor and external keyboard connected. And check that the key on the front panel is not in "locked" position!
Thank you, now i could get the ok prompt with break.
one more prob. i have is, not able to change the boot-device.
It was set to net and i have changed to disk with "setenv boot-device disk" command at ok prompt.
when i give "printenv boot-device" it shows disk, but again it is trying to boot from net
after post tests it shows like below
can some help how to change the boot-device to disk.
Thanks in advance,
kk
Last edited by Don Cragun; 04-07-2015 at 09:59 PM..
Reason: Add CODE tags.
I got a coffee table(enterprise 3000) for free from a friend a couple of months ago, and I'm trying to convince it to boot.
List of cards
1x Clock Board
1x I/O board
2x CPU Boards
1x SCSI board? It has 2 SCSI headers on it anyway
In addition, its HDD rack is almost full of 18GB drives.... (3 Replies)
Hi,
I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is
Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken.
Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Good Day,
We have bought Sun Sparc Enterprise T5120 with pre-installed Solaris 10 Sparc
But i need on this server Solaris 9. I have inserted in to DVD-rom (USB DVD-rom) with Solaris 9 for Sparc.
Then log into shell and type: reboot -- cdrom.
System rebooted and i have this message:
... (3 Replies)
I am trying to connect to our Sun Enterprise 420R server via Hyperterminal. Using settings of 9600,n,1,n, I am getting nothing on COM4 (my laptop's ethernet port). I've also tried COM3, COM2, and COM5 - but at least I can type in COM4: the other three I cannot type when trying to connect. I am... (2 Replies)
Hellow,
i bought a sun enterprise 420r. I would like to connect to the console for installation of a new operating system (solaris 10)
I made a connection from a usb --> com-port --> serial port of the server.
I configured my hyperterminal (9600 8n1) and when i connect to my server and... (2 Replies)
I've search the forum and came up with someone having the same issue where the power does not going to the main board. I turn the key and nothing, no lights or anything moving. I have another board put it in the same system and it works just fine. Please help, thank you in advance. (2 Replies)
I have a 420r server it boots up all of the network settings are correct, however the machines network connection is not working. Cant ping anything from it, cant ping it from another machine on the network.
If I ping 127.0.0.1 it says alive.
Is there a chance the network card has been... (2 Replies)
I am needing to install solaris 2.6 on a Enterprise 420R with 4X450mHz. Documentation says you need Operating Enviroment Installation CD February 2000(704-7076-10). Does anyone know where I can get this? (4 Replies)