thanks all SAN issue got it seems .after patch update
but still having issue with 10 G network card. if i reset the port from san switch , it will ping the IP and after sometime it's going offline and on Switch side this interface is not learning MAC address.
---------- Post updated 03-20-15 at 01:17 AM ---------- Previous update was 03-19-15 at 03:43 PM ----------
Quote:
Originally Posted by achenle
Did you try known-to-be good FC cables?
Run this under sh/bash:
Post the results.
and moreover fro yesterday onwords i am watching the logs, from another script i did some mount->touch files -> delete files -> unmount is doing. till now no isues for SAN connectivity
But still have issue with network card
---------- Post updated at 01:17 AM ---------- Previous update was at 01:17 AM ----------
---------- Post updated at 05:00 PM ---------- Previous update was at 01:17 AM ----------
HI
any helps please
regards,
Ben
Last edited by Don Cragun; 03-20-2015 at 09:58 PM..
Reason: Fix CODE tags again.
How to get LUN WWN (i.e LUN mapped from a storage box say Symmetrix or clariion) in Solaris. fcinfo command does give the Target port wwn but what i'm looking for is the LUN WWN. Any help is appreciated. (2 Replies)
Hi,
GetName()
{
if
then
echo " Please enter the name: "
read Name
tempvar=0
while read line
do
if
then
tempvar=`expr $tempvar + 1`
echo $tempvar
... (10 Replies)
Hi All,
I'm using Solaris server, SunOS 5.10 Generic_144488-08 sun4u sparc SUNW, SPARC-Enterprise.
There is a newly created LUN of 250GB (EMC). I've scanned the system and able to see the new LUN.
For example:
103. emcpower19a <DGC-VRAID-0430 cyl 48638 alt 2 hd 256 sec 16>... (4 Replies)
need to do LUN masking at qlogic HBA level..at RHEL 5.x
I am using qla* module at part of the Unix kernel, it is not OEM drivers that come with the HBA card, so I can't use Sansurfer to do this..
Is there a way to do this at all ??
:wall: (0 Replies)
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
hi,
what are the steps to detect and configure a new attached lun in Solaris 10.
Is there any difference between cfgadm and luxadm command ?
rgds,
snjksh (5 Replies)
System: Sun M3000 and M4000
OS: Solaris 10 (fully up to date with latest patches)
iSCSI HBA: 2x QLE4060C (QLogic)
In each system are 2 QLE4060C iSCSI adapters.
I manage to set up both HBA's to connect to the LUNs on the SAN
However I don't manage to enable multi-pathing.
Made the... (4 Replies)
I'm piping the results of a tcpdump into a shell script and want certain commands executed (specifically the firing of an SNMP alert) based on a grep for certain contents in the output of tcpdump.
For example, I have
#!/bin/bash
while read str; do
grep 'ttl 64' -q && sudo snmptrap -v 1... (2 Replies)
Is there a limit to the number of LUNS that can be concatenated using Solaris Volume manager with Soft partitions?
I have worked with some AIX admins in the past and there was such a limitation therefore limiting the size the filesystem could grow to.
Is there such a limitation in Solaris 9... (6 Replies)
Hi all,
Can someone advice, why I'm getting a segmentation fault on a Linux system for a program which looks like the below one--:
typedef struct idev{
int p,
char q;
} Idev;
typedef struct abc{
int i;
Idev *idev_ptr;
} ABC;
int main(){
ABC a_var;
char str;
int... (4 Replies)