Cannot remove disk added to zpool

10 More Discussions You Might Find Interesting

1. Solaris

How to clear a removed single-disk pool from being listed by zpool import?

On an OmniOS server, I removed a single-disk pool I was using for testing. Now, when I run zpool import it will show it as FAULTED, since that single disk not available anymore. # zpool import pool: fido id: 7452075738474086658 state: FAULTED status: The pool was last...

2. Solaris

Replace zpool with another disk

issue, I had a zpool which was full pool_temp1 199G 197G 1.56G 99% ONLINE - pool_temp2 199G 196G 3.09G 98% ONLINE - as you can see, full so I replaced with a larger disk. zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0...

3. Solaris

Exporting zpool sitting on different disk partition

Hello, I need some help in recovering ZFS pool. Here is scenerio. There are two disks - c0t0d0 - This is good disk. I cloned it from other server and boot server from this disk. c0t1d0 - This is original disk of this server, having errors. I am able to mount it on /mnt. So that I can copy...

4. AIX

LPAR cannot added disk

Dear All, I created a new partition through "Integrated Virtualization Manager" but there have an error when I added a new disk to the partition. The disk already created without any issue, Below error is to add the disk to the partition An error occured while modifying the assignments...

5. Solaris

Add disk to zpool

Hi, Quick question. I have a data zpool that consists of 1 disk. pool: data state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM data ONLINE 0 0 0 c0t50002AC0014B06BEd0 ONLINE...

6. Solaris

Bad exchange descriptor : not able to remove files under zpool

Hi , One of my zone went down and when i booted it up i could see the pool in degraded state with some check sum errors . we have brought the pool online after scrubbing. But few files are showing this error Bad exchange descriptor Please let me know how to remove these files

7. AIX

Remove the disk online

Hi I have one of the disk missing in my NIMVG. My doubt is can I remove this hdisk2 online ? few of the file systems seems to be spread over 7 PV's. that's why i'm worried. Can someone suggest if I can replace this disk online. Also how to check if there is some data present in hdisk2 alone...

8. Red Hat

Partitioning newly added disk to Redhat

Hi Everyone, I have added new Virtual disk to OS. The main point is I need to bring this whole Disk into LVM control, is it necessary to partition the disk using fdisk command and assign partition type as '8e', or can I directly add that disk into LVM, by running pvcreate command with out...

9. Solaris

Can't remove a LUN from a Zpool!

I am not seeing anyway to remove a LUN from a Zpool... Am I missing something? or do i have to destroy the zpool and recreate it?

10. Solaris

Remove the exported zpool

I had a pool which was exported and due to some issues on my SAN i was never able to import it again. Can anyone tell me how can i destroy the exported pool to free up the LUN. I tried to create a new pool on the same pool but it gives me following error # zpool create emcpool4 emcpower0c...

LEARN ABOUT NETBSD

lvconvert

LVCONVERT(8)						      System Manager's Manual						      LVCONVERT(8)

NAME

       lvconvert - convert a logical volume from linear to mirror or snapshot

SYNOPSIS

       lvconvert  -m|--mirrors	Mirrors  [--mirrorlog {disk|core}] [--corelog] [-R|--regionsize MirrorLogRegionSize] [-A|--alloc AllocationPolicy]
       [-b|--background] [-i|--interval Seconds] [-h|-?|--help] [-v|--verbose] [--version]
       LogicalVolume[Path] [PhysicalVolume[Path]...]

       lvconvert -s|--snapshot [-c|--chunksize ChunkSize] [-h|-?|--help] [-v|--verbose] [-Z|--zero y|n] [--version]
       OriginalLogicalVolume[Path] SnapshotLogicalVolume[Path]

DESCRIPTION

       lvconvert will change a linear logical volume to a mirror logical volume or to a snapshot of linear volume and vice versa.  It is also used
       to add and remove disk logs from mirror devices.

OPTIONS

       See lvm for common options.
       Exactly one of --mirrors or --snapshot arguments required.

       -m, --mirrors Mirrors
	      Specifies  the  degree  of the mirror you wish to create.  For example, "-m 1" would convert the original logical volume to a mirror
	      volume with 2-sides; that is, a linear volume plus one copy.

       --mirrorlog {disk|core}
	      Specifies the type of log to use.  The default is disk, which is persistent and requires a small amount of storage space, usually on
	      a  separate  device from the data being mirrored.  Core may be useful for short-lived mirrors: It means the mirror is regenerated by
	      copying the data from the first device again every time the device is activated - perhaps, for example, after every reboot.

       --corelog
	      The optional argument "--corelog" is the same as specifying "--mirrorlog core".

       -R, --regionsize MirrorLogRegionSize
	      A mirror is divided into regions of this size (in MB), and the mirror log uses this granularity to track which regions are in sync.

       -b, --background
	      Run the daemon in the background.

       -i, --interval Seconds
	      Report progress as a percentage at regular intervals.

       -s, --snapshot
	      Create a snapshot from existing logical volume using another existing logical volume as its origin.

       -c, --chunksize ChunkSize
	      Power of 2 chunk size for the snapshot logical volume between 4k and 512k.

       -Z, --zero y|n
	      Controls zeroing of the first KB of data in the snapshot.  If the volume is read-only the snapshot will not be zeroed.

Examples
       "lvconvert -m1 vg00/lvol1"
       converts the linear logical volume "vg00/lvol1" to a two-way mirror logical volume.

       "lvconvert --mirrorlog core vg00/lvol1"
       converts a mirror with a disk log to a mirror with an in-memory log.

       "lvconvert --mirrorlog disk vg00/lvol1"
       converts a mirror with an in-memory log to a mirror with a disk log.

       "lvconvert -m0 vg00/lvol1"
       converts a mirror logical volume to a linear logical volume.

       "lvconvert -s vg00/lvol1 vg00/lvol2"
       converts logical volume "vg00/lvol2" to snapshot of original volume "vg00/lvol1"

SEE ALSO

       lvm(8), vgcreate(8), lvremove(8), lvrename(8), lvextend(8), lvreduce(8), lvdisplay(8), lvscan(8)

Red Hat, Inc						 LVM TOOLS 2.02.44-cvs (02-17-09)					      LVCONVERT(8)

Solaris