Cannot remove disk added to zpool

10 More Discussions You Might Find Interesting

1. Solaris

How to clear a removed single-disk pool from being listed by zpool import?

On an OmniOS server, I removed a single-disk pool I was using for testing. Now, when I run zpool import it will show it as FAULTED, since that single disk not available anymore. # zpool import pool: fido id: 7452075738474086658 state: FAULTED status: The pool was last...

2. Solaris

Replace zpool with another disk

issue, I had a zpool which was full pool_temp1 199G 197G 1.56G 99% ONLINE - pool_temp2 199G 196G 3.09G 98% ONLINE - as you can see, full so I replaced with a larger disk. zpool replace pool_temp1 c3t600144F0FF8BA036000058CC1DB80008d0s0...

3. Solaris

Exporting zpool sitting on different disk partition

Hello, I need some help in recovering ZFS pool. Here is scenerio. There are two disks - c0t0d0 - This is good disk. I cloned it from other server and boot server from this disk. c0t1d0 - This is original disk of this server, having errors. I am able to mount it on /mnt. So that I can copy...

4. AIX

LPAR cannot added disk

Dear All, I created a new partition through "Integrated Virtualization Manager" but there have an error when I added a new disk to the partition. The disk already created without any issue, Below error is to add the disk to the partition An error occured while modifying the assignments...

5. Solaris

Add disk to zpool

Hi, Quick question. I have a data zpool that consists of 1 disk. pool: data state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM data ONLINE 0 0 0 c0t50002AC0014B06BEd0 ONLINE...

6. Solaris

Bad exchange descriptor : not able to remove files under zpool

Hi , One of my zone went down and when i booted it up i could see the pool in degraded state with some check sum errors . we have brought the pool online after scrubbing. But few files are showing this error Bad exchange descriptor Please let me know how to remove these files

7. AIX

Remove the disk online

Hi I have one of the disk missing in my NIMVG. My doubt is can I remove this hdisk2 online ? few of the file systems seems to be spread over 7 PV's. that's why i'm worried. Can someone suggest if I can replace this disk online. Also how to check if there is some data present in hdisk2 alone...

8. Red Hat

Partitioning newly added disk to Redhat

Hi Everyone, I have added new Virtual disk to OS. The main point is I need to bring this whole Disk into LVM control, is it necessary to partition the disk using fdisk command and assign partition type as '8e', or can I directly add that disk into LVM, by running pvcreate command with out...

9. Solaris

Can't remove a LUN from a Zpool!

I am not seeing anyway to remove a LUN from a Zpool... Am I missing something? or do i have to destroy the zpool and recreate it?

10. Solaris

Remove the exported zpool

I had a pool which was exported and due to some issues on my SAN i was never able to import it again. Can anyone tell me how can i destroy the exported pool to free up the LUN. I tried to create a new pool on the same pool but it gives me following error # zpool create emcpool4 emcpower0c...

LEARN ABOUT OSF1

volreattach

volreattach(8)						      System Manager's Manual						    volreattach(8)

NAME

       volreattach - Reattaches disk drives that have once again become accessible

SYNOPSIS

       /usr/sbin/volreattach [-rb] [accessname...]

       /usr/sbin/volreattach -c  accessname

OPTIONS

       The  volreattach  utility  has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
       failed disk.  Performs the reattach operation in the background.  Checks whether a reattach is possible. No operation is performed, but the
       name of the disk group and disk media name at which the disk can be reattached is displayed.

DESCRIPTION

       The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.

       This  operation	may  be  necessary  if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
       Storage Manager is started, causing disks to enter the failed state.

       If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as  long  as  the
       reattach happens before any volumes on the disk are started.

       The volreattach command is called from the voldiskadm menus as part of disk recovery.

       The  volreattach  utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
       disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.

EXIT CODES

       A zero exit status is returned if it is possible to perform a reattach.	Otherwise, non-zero is returned.

SEE ALSO

       volintro(8), voldiskadm(8), volrecover(8)

																    volreattach(8)

Solaris