Has anyone had this problem when you connect an external hard drive to the server and it is simply not visible with any commands?
The server is HP DL380 g8, and OS is:
The goal is: make a backup on the external HDD.
The problem is: the disk is not visible
The disk was formated in NTFS (not visible), ext3 (not visible), raw (deleted the file system - still not visible).
Acctually, the device is connected and it can be seen here, but it is not visible with format, or rmformat commands:
I tried devfsadm and disabling the volfs but to no avail... The dmesg also returns that the device is connected and it is visible in /dev/usb/ as mass-storage.
Does anyone know what could be the problem?
- USB 3.0?
- Solaris FS support?
The solution could be to format the exHDD to UFS before connecting it to the server, but I couldn't find a tool to do it...
You can have a Windows format or a Solaris format (ie, write a Solaris filesystem on it).
Running Solaris 10 you should be able to do these three steps:
The rmformat should let you see the device node (eg, /dev/rdsk/whatever), then stop the volume services, then fdisk the device to write label, partition, etc.
If that fails tell us all where, when, error message(s), etc.
@jlliagre: I would like to put any FS that Solaris would recognize, but I didn't find a (freeware) tool on the net which lets me do so.
@hicksd8:
The format on that USB drive could be any that Solaris can read (UFS, ZFS,...).
I tried rmformat -l, but I simply don't get the exHDD which I pluged in.
This is all I get (only the DVD drive):
I tried that with or without the volfs. The fdisk, I didn't try.
Could it be that the problem is in the USB 3.0 port and that the server doesn't support that? or
Could it be that the disk needs to have its own power cord?
Hi Folks,
I am unable to detected newly added HDD in my redhat-5 OS.
I am expecting to get /dev/sdb.
Following are the utilized commands or syntax.
root@hostname% cat /etc/redhat-release
Red Hat Enterprise Linux Client release 5.4 (Tikanga) echo "- - -" > /sys/class/scsi_host/host0/scan %... (1 Reply)
Hello all, thanks for reading my question:
So I've been a Unix/Linux SysAdmin for a couple years, and I'm a bit over my head running solo, trying to set up LDoms using Oracle VM Server 3.1 for SPARC. I've been very careful, and things have gone well up until the point I try to access the new... (9 Replies)
accidentally formatted ext3 external hard disk .. im using EAse us tool in windows system to recover the data ... will this works??
if yes ... the another external hard disk have to be formatted in which file system ?
is there any other option ..please help me out (1 Reply)
Hi All,
I am very new to UNIX systems and need your help.
OS: RHEL 5.4(LINUX) 64 bit
I need to get a new external 2TB HDD for transferring data from between linux machines. This HDD will not be used in any windows/MAC servers. Only on UNIX systems(linux/solaris) the USB device is to be... (1 Reply)
Hello everyone ! I just installed Red Hat 6.4 and when i plug in my external HDD firstly i can see the files and after 5 seconds all dissapears. What causes to this and ways to fix it ? Thanks in advance ! (1 Reply)
I need to get an external HDD for a SUN server running Solaris 10. The Western Digital that I have will not recognize and when I went looking for drivers WD only has them for MAC and Windows. Is there a External HDD that is known to work with Unix? (24 Replies)
Hi,
As I did not find any specific group for this question, i am putting it here.
Can I install Mac OS on an external hard disk?
Is this possible or not? I know it is very hard to install mac os on non-mac hardwares. I have a dell inspiron laptop and i want to use mac from external hdd.
... (1 Reply)
Hello UNIX-community,
We have an older SCO UNIX-system running PCS3 (an industrial platform) and since a few weeks we are experiencing problems with our archiving software.
For about ten years, the system archives data to Magneto-Optical discs (MO-discs) and thus far it has worked fine.... (3 Replies)
Hi Friends,
I am using VMware 6.0 and i want to transfer some files from External HDD so how to mount the Disk, and i am not able to assign any ip to my network card any one can help me how to set ip in VMware.
Thanks and Regards,
Venky.:b: (0 Replies)
Hi,
I want to install LINUX on my laptop. I have a 2GHZ,1GB RAM and HDD is not partitioned. I donot want to touch this HDD and I have external HDD of 200GB. Can I install LINUX on this external HDD?. I would like system to detect linux only when I connect my external hard drive. else system should... (5 Replies)