Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Hello All, Is it possible to remove a slice from Raid 5 metadevice in SVM which made by only 3 slice ? I can understand the data normally getting split in all 3 disk, if one of a slice(disk) getting failed what we can do ? Only metareplace is the option ? or any other way we have ? ... (3 Replies)
Hi, i had search through this forum about the RAID 5 configurations on HPUX server (model RP5470) but only find this thread:
https://www.unix.com/hp-ux/23910-raid-0-unix.html
.. there are two way to configure the RAID that provided from this thread
RAID 0
****************
#!/bin/sh... (7 Replies)
vfstab(4) File Formats vfstab(4)NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)