We've a Sun SPARC T5120 server with Solari 10,
I was planning to restart the admin password of SC by 'scadm' in OS environment, but it seems it is not installed ..
Can you please guide me which package contains this tool ?
Can't see it not being installed although it might be missing.
Sorry, here is a correction - not sure if the scadm utility is on the T5120 by default. From memory it may be the SUNWkvm (I think) or there may be a way to reset the ALOM back to the default condition through the front panel switches. On the Mseries you can throw he switch without inpact to reset the LOM to default - not sure about the T5120 although I've used them before I've never had to reset one.
Just a quick check, you do have "/usr/platform/sun4v/sbin" on your path?
Regards
Gull04
---------- Post updated at 10:32 PM ---------- Previous update was at 10:18 PM ----------
Hi,
The path can be found out using
it will then be /usr/platform/SUN-T5120/sbin" or something similar - not as I said earlier "sun4v"
Here is some additional information that I found while checking some stuff out, it seems that you can default the password back to "changeme" on the ILOM/Service Controller - but there is an outage required. The process seems to be;
To reset a lost ILOM password on a T5120, you need to put a jumper to connect pins 1 and 2 of J6801 on the motherboard. The J6801 you want is near the very back, middle of the jumper card right next to where the middle PCIe card would go.
Regards
Gull04
Last edited by gull04; 04-22-2014 at 06:44 PM..
Reason: Additional info
DukeNuke2, gull04,
Thanks for your replies, and sorry for delay in posting the reply, we had alot of operations since then and I'm back to recover the SC password
Quote:
there may be a way to reset the ALOM back to the default condition through the front panel switches. On the Mseries you can throw he switch without inpact to reset the LOM to default - not sure about the T5120 although I've used them before I've never had to reset one.
Actually, in meantime I read some papers from Sun/Oracle website, and also they suggested to use a jamper to reset the iLOM password [factory-reset maybe].
You see, on the host that we try to reset the SC password, we've defined some LDoms, so my only concern here is, by doing iLOM factory-reset, does it affect the LDoms or not ?
Quote:
Just a quick check, you do have "/usr/platform/sun4v/sbin" on your path?
Yep, already checked but does not exist.
Quote:
Is the ipmitool installed on the system?
Yes, it is ..
However, when I've tried to list the users, I got this error:
So, do I need to parse -H with the IP of OS ?
I want to run solaris10 with my pxelinux server
i put on pxelinux.cfg/default this
LABEL solaris 10
kernel mboot.c32
append -solaris solaris/boot/platform/i86pc/kernel/unix -v -m verbose install dhcp nowin nfs://192.168.0.2/jumpstart/config.tar -B install_media=192.168.0.2:/solaris... (0 Replies)
Technical Prose: Solaris integration with Active Directory - Part I
follow this guide,install solarisgcc,and dev libraries required.
But after configure i get
checking for res_search... yes
checking for krb5_init_context in -lkrb5... yes
checking for ldap_initialize in -lldap... yes... (0 Replies)
I am trying to install VirtualBox on RHEL 5 but I need the 32 bit version for 32 bit Windows. When I run yum I get the following:
sudo yum localinstall /auto/spvtg-it/spvss-migration/Software/VirtualBox-4.3-4.3.2_90405_el6-1.i686.rpm
Loaded plugins: fastestmirror
Setting up Local Package... (13 Replies)
Hello,
This is a programming question as well as a suse question, so let me know if you think I should post this in programming.
I have an application that I compiled under opensuse 12.2 using g77-3.3/g++3.3. The program compiles and runs just fine. I gave the application to a colleague who... (2 Replies)
Hi All
How can we verify if any of the parameters we have change in Solaris10 after reboot. Like is there any command? Please advice
Thanks (3 Replies)
Good morning all
Once again, I come seeking wisdom :-)
I have a sunfire 6800 with two domains. Both Sc controllers are uncontactabe, probably due to network issues, but as the server is on a different site, Im a little stuck.
So, am trying to use scadm, as I know I can view / configure... (7 Replies)
hi to all,
I am newuser can anyone tell me from where i get the sun solaris 10 dumps.
plz mail me at (no email addresses - read the RULES of these forums) (2 Replies)
Hi all,
I wrote a small shell (bash) script and it was executing well. I'm getting problem when I use this in crontab. My script is:
#!/usr/bin/bash
mkdir `date '+%m-%d-%y'`
cd `date '+%m-%d-%y'`
cvs co -r br_name module
cd dir1/dir2/dir3
bash build.sh
this is doing well... (7 Replies)
I just download solaris 10, from sun.com, I have them ziped in my HD,
How can I install them, so I can run solaris10, my present os is RH9;
THANKS (5 Replies)
sorry,my english is poor.
who can install win2003 and solaris10 in one pc ?
my win2000server in hda1
so
frist install win2003 in hda5
second install solaris10 in hda2
but after install over,the win2003 can't logon in. alway let me press<ctrl>+<alt>+<del>.
why? (1 Reply)