Solaris 2nd nic for different subnet

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Changing single path NIC to a teamed connection in same subnet

Dear all, I have a remote CentOS7 server that has two network cards. Each card has four ports and port one of card one was defined with the IP address assigned to the server. So far, so good and it's been working for over a year. We have now got cables sorted out so there are four paths...

2. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

3. Solaris

Solaris 11 2nd nic for different subnet

I have a Solaris 11 machine with 2 network cables attached. The first one is the default route and is working okay. I am trying to activate the second on another subnet, but am sure missing something. The first one is on 10.30.128. and with it everything works fine, but when I try to add the...

4. Solaris

Changing the subnet mask on solaris 10

Hello, can anyone help me with the command to change the subnet mask on solaris 10? The mask is currently 255.255.255.255 I will like to change it to 255.255.2555.0. Thank you

5. Solaris

x86 Solaris 10 nic driver added but not attached. NIC is not detected.

I couldn't install my nic in solaris 10. I compiled and added the driver but failed to attach the driver and ifconfig output shows only loopback dev. Please see the following output and tell me whether my nic has been detected and why the driver failed to attach? My nic is detected in linux...

6. Solaris

NIC drivers+solaris 10

Installed solaris 10 and now i want to connect to internet,to make work this i need to NIC drivers can some body tell me is it possible to get drivers and how to install. I am dying to get rid of this problem..please help me

7. IP Networking

Migrating existing Subnet to a new subnet and changing ip addresses in UNIX

Hi, My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information. John

8. IP Networking

add route to a subnet - Solaris 2.6

WE are running Unix - Solaris 2.6, we create a subnet. In the windows enviroment we are able to add a static route by using route add -p 172.16.10.0 mask 255.255.255.0 172.16.17.224, but when we add the route in Solaris as route add -net 172.16.10.0 255.255.255.0 172.16.17.224, we receive an...

LEARN ABOUT SUSE

ocf_heartbeat_viparip

OCF_HEARTBEAT_VIPARI(7) 					OCF resource agents					   OCF_HEARTBEAT_VIPARI(7)

NAME

       ocf_heartbeat_VIPArip - Manages a virtual IP address through RIP2

SYNOPSIS

       VIPArip [start | stop | monitor | validate-all | meta-data]

DESCRIPTION

       Virtual IP Address by RIP2 protocol. This script manages IP alias in different subnet with quagga/ripd. It can add an IP alias, or remove
       one.

SUPPORTED PARAMETERS

       ip
	   The IPv4 address in different subnet, for example "192.168.1.1". (required, string, no default)

       nic
	   The nic for broadcast the route information. The ripd uses this nic to broadcast the route informaton to others (optional, string,
	   default eth0)

       zebra_binary
	   Absolute path to the zebra binary. (optional, string, default /usr/sbin/zebra)

       ripd_binary
	   Absolute path to the ripd binary. (optional, string, default /usr/sbin/ripd)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
	   Starts the resource. Suggested minimum timeout: 20s.

       stop
	   Stops the resource. Suggested minimum timeout: 20s.

       monitor
	   Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval: 5s.

       validate-all
	   Performs a validation of the resource configuration. Suggested minimum timeout: 20s.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5s.

EXAMPLE

       The following is an example configuration for a VIPArip resource using the crm(8) shell:

	   primitive example_VIPArip ocf:heartbeat:VIPArip 
	     params 
	       ip=string 
	     op monitor depth="0" timeout="20s" interval="5s"

SEE ALSO

       http://www.linux-ha.org/wiki/VIPArip_(resource_agent)

AUTHOR

       Linux-HA contributors (see the resource agent source for information about individual authors)

resource-agents 1.0.3						    07/05/2010						   OCF_HEARTBEAT_VIPARI(7)

Solaris