RAID 1 + 0 with LVM

9 More Discussions You Might Find Interesting

1. Linux

Centos 7.2 Convert single LVM to RAID Mirror Reinstall BootLoader

Hello, I am trying to convert a single-drive Centos 7.2 installation with LVM into a two-disk mdadm mirror with mrrored LVM. I was able to follow the excellent instructions at: http://www.dgoradia.com/creating-a-raid1-mirrored-on-an-existing-centos-on-lvm/and did create a two-disk mirror...

2. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i...

3. UNIX for Dummies Questions & Answers

How to convert non LVM root partition to LVM?

Hi Guys, I m using redhat 6, I have installed root partition as non-LVM . Is there any way i can convert it to LVM?

4. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

5. Solaris

Solaris LVM Raid 0+1

Hi, I tried to setup a Riad 0+1 but I found no step by step manual to follow so I tried on my own ;) I'd already configured a mirror for the OS on my Solaris machines so I had an idea where to start. I have 9 drives in the server. 1. I configured the first two as a mirror for the OS. 2. I...

6. Filesystems, Disks and Memory

Partition management: lvm? fdisk? parted? (on RAID)

Hello, I have a RHEL system with two 500GB hard drives in RAID 1 (I think hardware, but not 100% certain - any way to tell?). It looks like it was just set up in default configuration with a small boot partition and one huge partition for the rest, which composes a LVM volume. I want...

7. HP-UX

How to reduce LVM to create another LVM

Hi, I'm new to HP-UX. I have LVM on /var with 92Gig. I would like to reduce it to create another LVM for Oracle client with 800 meg or so. How to do it. I'm running 11.iv3 Thanks

8. UNIX for Advanced & Expert Users

Is there a tutorial on how to create RAID 1 on top of lvm?

Hi, there are tons of RAID1 tutorials, but none of them deal with lvm. The problem is that I want to expand my current lvm partition over RAID1 rather than creating a new lvm partition after RAID1 is created. My master harddrive has lvm partition. I'm wondering how to create a RAID1 image of...

9. Solaris

raid 5 using solaris 9 LVM

if i want to create a raid 5 device on 3 disks I have, can I make multiple metadevices? all the example i see on the internet make use of the slice 2 placing the entire disk into the raid5 device. what if i make 3 identical slices on each disk, and make 3 raid 5 metadevices? will that work?

LEARN ABOUT OSF1

ataraid

ATARAID(4)						   BSD Kernel Interfaces Manual 						ATARAID(4)

NAME

     ataraid -- ATA software RAID support

SYNOPSIS

     device ata
     device ataraid

DESCRIPTION

     The ataraid driver provides support for so-called software RAID (sometimes referred to as fake RAID or pseudo RAID).

     When a controller that supports software RAID is instructed to create a RAID array, its BIOS writes data structures in a specific metadata
     format to the disks.  These data structures are picked up by the ataraid driver, so that FreeBSD can work with the array.	The ataraid driver
     has to understand the specific metadata format of a controller BIOS in order to support its RAID capabilities.

     Read-only support for a metadata format means that FreeBSD can use the given RAID array for normal read/write operations.	Creation and
     rebuild of such arrays has to be done from the controller BIOS.

     Read and write support for a metadata format means that FreeBSD can use the given RAID array for normal read/write operations.  Additionally,
     the atacontrol(8) utility can be used to create, rebuild, update and fail such RAID arrays.

     The ataraid driver can read the following metadata formats:

     o	 Adaptec HostRAID
     o	 Highpoint V2 RocketRAID
     o	 Highpoint V3 RocketRAID
     o	 Intel MatrixRAID
     o	 Integrated Technology Express (ITE)
     o	 JMicron
     o	 LSI Logic V2 MegaRAID
     o	 LSI Logic V3 MegaRAID
     o	 NVIDIA MediaShield
     o	 Promise FastTrak
     o	 Silicon Image Medley
     o	 Silicon Integrated Systems (SiS)
     o	 VIA Tech V-RAID
     o	 FreeBSD PseudoRAID

     The ataraid driver can write the following metadata formats:

     o	 Highpoint V2 RocketRAID
     o	 Intel MatrixRAID
     o	 JMicron
     o	 Promise FastTrak
     o	 Silicon Integrated Systems (SiS)
     o	 VIA Tech V-RAID
     o	 FreeBSD PseudoRAID

     It is also possible to use software RAID on controllers that do not have special software RAID capabilities.  See atacontrol(8) for details.

FILES

     /dev/ar*  ATA RAID device nodes

SEE ALSO

     ata(4), atacontrol(8)

CAVEATS

     RAID5 is not supported at this time.  Code exists, but it neither uses nor maintains parity information.

AUTHORS

     The ataraid driver was written by Soren Schmidt <sos@FreeBSD.org>.  This manual page was written by Christian Brueffer
     <brueffer@FreeBSD.org>.

BSD
								 February 17, 2006							       BSD

Solaris