Hi All,
I am facing a issue with robtest not working on netbackup 7.1 on solaris 10.
I can see the robots and drives are deteted by O.S but not sure why robtest is not working.
Below are few ouputs of few commands.
HTML Code:
$PWD>cfgadm -al -o show_FCP_dev
Ap_Id Type Receptacle Occupant Condition
c1 fc-private connected configured unknown
c1::500000e0d0699b06,0 disk connected configured unknown
c1::500000e0d0699b06,1 disk connected configured unknown
c2 fc connected unconfigured unknown
c3 fc-private connected configured unknown
c3::500000e0d0699b86,0 disk connected configured unknown
c3::500000e0d0699b86,1 disk connected configured unknown
c4 fc-private connected configured unknown
c4::2002000e111c0759,0 tape connected configured unknown
c4::2002000e111c0759,1 med-changer connected configured unknown
Sgscan
HTML Code:
#
#WARNING: detected StorEdge Network Foundation connected devices not in
# SG configuration file:
#
# Device World Wide Port Name 500000e0d0699b06
# Device World Wide Port Name 500000e0d0699b86
# Device World Wide Port Name 2002000e111c0759
#
# See /usr/openv/volmgr/NetBackup_DeviceConfig_Guide.txt chapter
# "Special configuration for "Sun StorEdge Network Foundation" HBA/Driver"
# for information on how to use sg.build and sg.install to
# configure these devices
#
/dev/sg/c0t3l0: Cdrom: "TEAC DV-W28SS-R"
/dev/sg/c0tw2002000e111c0759l0: Tape (/dev/rmt/0): "HP Ultrium 5-SCSI"
/dev/sg/c0tw2002000e111c0759l1: Changer: "FSC FibreCAT-TX24 S2"
/dev/sg/c0tw500000e0d0699b06l0: Disk (???): "FUJITSU ETERNUS_DXL"
/dev/sg/c0tw500000e0d0699b06l1: Disk (???): "FUJITSU ETERNUS_DXL"
/dev/sg/c0tw500000e0d0699b86l0: Disk (???): "FUJITSU ETERNUS_DXL"
/dev/sg/c0tw500000e0d0699b86l1: Disk (???): "FUJITSU ETERNUS_DXL"
Robtest
HTML Code:
Configured robots with local control supporting test utilities:
TLD(0) robotic path = /dev/sg/c0tw2002000e111c0759l1
Robot Selection
---------------
1) TLD 0
2) none/quit
Enter choice: 1
Robot selected: TLD(0) robotic path = /dev/sg/c0tw2002000e111c0759l1
Invoking robotic test utility:
/usr/openv/volmgr/bin/tldtest -rn 0 -r /dev/sg/c0tw2002000e111c0759l1
Opening /dev/sg/c0tw2002000e111c0759l1
MODE_SENSE complete
Enter tld commands (? returns help information)
s s
read_element_status failed
sense key = 0x2, asc = 0x4, ascq = 0x8e, UNKNOWN ERROR, KEY: 0x02, ASC: 0x04, ASCQ: 0x8E
q
Tpconfig -d
HTML Code:
Id DriveName Type Residence
Drive Path Status
****************************************************************************
0 HP.Ultrium5-SCSI.000 hcart2 TLD(0) DRIVE=1
/dev/rmt/0cbn UP
Currently defined robotics are:
TLD(0) robotic path = /dev/sg/c0tw2002000e111c0759l1
EMM Server = solaris10
Please let me know incase more information is needed.
Thanks.
---------- Post updated 10-08-13 at 02:22 AM ---------- Previous update was 10-07-13 at 03:09 AM ----------
This solution worked.
http://www.symantec.com/business/sup...t&id=TECH17308