i try to allocate the same LUN to two server (or more in the future)
i use solaris 10, vxvm (vxfs) for data and solaris zones and EMC DMX-4, i try to migrate solaris zones between servers in case of problem.
and this is what i want to do
- affect LUN to srv00124 and srv10155
- the LUN must be imported only on one server
- in case of problem
- export or forcing import LUN to the other server
- mount all file system
- migrate the solaris zone
- roolback when the problem are resolved
anyone have suggestions ?
is this config file for making and mapping LUN are correct for affection on two server ?
Thanks a lot,
# cat srv00124_08FB
#
Last edited by jim mcnamara; 06-04-2013 at 05:44 PM..
There is major documentation that exists on this which I have somewhere. What major documentation have you already got? Please detail.
If you don't have much I will find what I have and upload it but will need to acknowledge all necessary copyrights and check that moderators are okay with that.
My major documentations is just the white papers from Sun and some documentations regarding EMC storage
i haven't find a good documents for EMC staorage and vxvm for doing this solution.
i have an other idea for if i can't make this solution but it not professional and not good
the other solution is (i know it's stupid)
- halt and detach zone
- umount fs
- export dgs
- romve mapping from the fist server
- remapping on the second server
- scan and export dgs
- mount fs
- attach zone
It will be good if you have good documents that you can share it.
we have an old AIX system with important data on an EMC LUN. the AIX server crashed and we had to rebuild it with the old AIX os 5.8. how do we reconnect the EMC LUN without losing the data? (15 Replies)
Hi All,
I have server : Sun-Fire-V490 configured with Solaris 10 zfs
..
and I have configured three mirror the third one from EMC
storage.
root@server # zpool status -v
pool: rpool
state: ONLINE
status: The pool is formatted using an older on-disk format. The pool can
... (8 Replies)
The Storage Admin presents a clone of a LUN, on the source side the device is under VxVM control, assuming that on the target side we have scanned the new cloned LUN at the OS level (solairs), from there on how do we initialize and mount the new volume.
Please give some guidence on this or a... (1 Reply)
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help.
Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Hi,
Quick question if anyone knows this. Is there a command I can use in Veritas Volume manager on Solaris that will tell me what the name of the SAN I am connected to? We have a number of SANs so I am unsure which one my servers are connected to. Thanks. (13 Replies)
Hi,
I have a nasty little problem with my disks on my system
My system configuration is as follows
Sunv890 with sunos 9 connected tot a IBM6800 SAN using a 2port 2 GB qla2342 adapter.
We have bought a EMC SAN. The company who sold us the san, said that it would be no problem connecting the... (10 Replies)
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)