Login or Register to Ask a Question and Join Our Community


Solaris

No network interface detected

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris No network interface detected
# 1  
Old 10-22-2005
Installing NIC and configuring dhcp
Hi all,

I just install solaris10 at home to learn b4 taking the sun courses. Can't get the internet on my IntelPC. I'm using cable thru SMC ezcard 10/100. I ran ifconfig -a and it only shows lo0. No hme0.

Pls help.
Last edited by maag; 11-14-2005 at 07:43 PM..
# 2  
Old 10-22-2005
This might help
# 3  
Old 10-25-2005
Thanks. Smilie
# 4  
Old 11-04-2005
Sorry that doesn't help.
Anyway I tried sys-unconfig yet it still give the same result.
Perhaps something to do with enabling dhcp?
# 5  
Old 11-10-2005
Update:
Check thru dhcpmgr ... it does not detect my NIC.
Check HCL from Sun, my NIC is inside.
Check hardware detection at boot, it shows my PCI: ethernet controller.
Check IRQ - no nonflict

Somebody pls help. Smilie
# 6  
Old 11-10-2005
See this thread - note I found it using a search of solaris and network. See the links in the thread - should help you find your answer.
# 7  
Old 11-11-2005
Thanks RTM. That's a new approach.
I'll give it a try and provide detail result if it fails.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is... (12 Replies)
Discussion started by: trevian3969
12 Replies

2. UNIX for Dummies Questions & Answers

Adding a network interface to a bonded interface

I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without... (1 Reply)
Discussion started by: westmoreland
1 Replies

3. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a... (7 Replies)
Discussion started by: samer.odeh
7 Replies

4. IP Networking

network interface -

Hello, Please, how can i create a network interface with a routable IP address on linux (ubuntu) ? AND How can i desactivate an interface? Thank you so much for help. (1 Reply)
Discussion started by: chercheur857
1 Replies

5. IP Networking

Network interface-

Hello, Please what's the difference between: AND Thank you so much (3 Replies)
Discussion started by: chercheur857
3 Replies

6. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that. (0 Replies)
Discussion started by: berny88
0 Replies

7. UNIX for Advanced & Expert Users

Multiple interface same network

hi I have a question, eth0 : 192.168.2.10 eth1: 192.168. 2.11 subnet : 255.255.255.0 eth0 and eth1 plug same swich I want communication between the two interface one host examp : ping 192.168.2.10 -I eth1 ping 192.168.2.11 -I eth0 but not respons.. pls helme (3 Replies)
Discussion started by: sadosan83
3 Replies

8. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks (9 Replies)
Discussion started by: skamal4u
9 Replies

9. UNIX for Advanced & Expert Users

Network interface goes down intermittently

Hi all, I'm using an HP Proliant server with double NIC and Debian 5 (Lenny) as its OS. I used link bonding on it for several years with no problem. Today, (now only one interface connected to switch) the interface went down. I restarted networking service (/etc/init.d/networking restart) and... (7 Replies)
Discussion started by: mjdousti
7 Replies

10. UNIX for Dummies Questions & Answers

Network Interface

Hi ! Does anyone know how can i get information about my network interface ... if it works in half or full duplex mode !! Thx in adivance ! Witt (4 Replies)
Discussion started by: witt
4 Replies
Login or Register to Ask a Question