10 More Discussions You Might Find Interesting
1. Red Hat
Hi,
I run RHEL 5.2 as a server in my lab. Now the issue I am facing is that I am unable to update my machine using yum update.
It shows an error of missing dependencies though dependencies are already installed.
Please help me to do that.
Error screen shot is also attached. (9 Replies)
Discussion started by: Ankur Goyal
9 Replies
2. Shell Programming and Scripting
I'm new to scripts, i wrote the below script to capture the percentage of FreeMemory available in Linux box. Output of UsedfreeMemory is displayed as '0'.
I'm expecting the output like 0.89 (or) .89 --- ( 0.89 perferable)
Anyone can help me on this pls.
... (3 Replies)
Discussion started by: murali1687
3 Replies
3. Solaris
Can any one please explain me the concept behind IPMP in solaris clustering.Basic explanation would be really appreciated...
Thanks in Advance
vks (2 Replies)
Discussion started by: vks47
2 Replies
4. HP-UX
Greetings!
I am trying to perform a passwordless SSH login from a HPUX 11.31 client to a HPUX 11.31 server. Whenever I do a "ssh -l root serverA" from the client, I am prompted for a password. Giving the password, I am able to successfully login. However I am trying to accomplish a... (9 Replies)
Discussion started by: Rob Sandifer
9 Replies
5. Solaris
Hi all
i had two interface
ce0 and ce5
but when i run the ifconfig, it show me alot of extra virtual interface, may i know how to remove it?
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0:... (2 Replies)
Discussion started by: SmartAntz
2 Replies
6. Solaris
Dear All,
I have configured IPMP in one of my SUN machine which is having solros 9 version. I have updated all files like /etc/hosts,/etc/hostname.ce0 and /etc/hostname.ce1 and rebooted the server. But IP's are not mounted which i have given in /etc/hosts file.
Please find the below ifconfig... (6 Replies)
Discussion started by: lbreddy
6 Replies
7. Solaris
Hi All,
I installed OpenSolaris and I try to do FTP from window to opensolaris via WinSCP 3.7.6 then I am getting the following error--
Couldn't agree a client-to-server cipher(available: aes128-ctr,aes192-ctr,aes256-ctr,arcfour128,arcfour256,arcfour)Please provide me your valuable... (3 Replies)
Discussion started by: smartgupta
3 Replies
8. Solaris
Probe-based IPMP active - active
Probe-based IPMP active - passive
Link-based only active -standby
????
What are differences between
Probe-based IPMP active - passive anddd
Link-based only active -standby
???!!!
For example in active active probe-based IPMP there are
lets... (6 Replies)
Discussion started by: samar
6 Replies
9. Solaris
Hi All,
I have unplumbed one interface.
after that ifconfig -a shows that
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
... (7 Replies)
Discussion started by: jegaraman
7 Replies
10. Solaris
Hi All,
Kindly help me in configuring IPMP or guid me to some link, tried goggling however no luck.
Thanks in anticipation (1 Reply)
Discussion started by: kumarmani
1 Replies
rge(7D) Devices rge(7D)
NAME
rge - Realtek Gigabit/Fast Ethernet Network Adapter driver
SYNOPSIS
/dev/rge
DESCRIPTION
The rge Gigabit/Fast Ethernet driver is a multi-threaded, loadable, clonable, GLD-based STREAMS driver supporting the Data Link
Provider Interface, dlpi(7P), on the Realtek Gigabit/Fast Ethernet Network Adapter.
The rge driver functions includes controller initialization, frame transmit and receive, promiscuous and multicast support, and error
recovery and reporting.
APPLICATION PROGRAMMING INTERFACE
The cloning, character-special device /dev/rge is used to access all Realtek Gigabit/Fast Ethernet devices installed within the system.
The rge driver is managed by the dladm(1M) command line utility, which allows VLANs to be defined on top of rge instances and for rge
instances to be aggregated. See dladm(1M) for more details.
The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are as follows:
o Maximum SDU (with jumbo frame) is 7000.
o Minimum SDU is 0.
o DSLAP address length is 8 bytes.
o MAC type is DL_ETHER.
o SAP length value is -2, meaning the physical address component is followed immediately by a 2-byte sap component within the
DLSAP address.
o Broadcast address value is Ethernet/IEEE broadcast address (FF:FF:FF:FF:FF:FF).
Once in the DL_ATTACHED state, you must send a DL_BIND_REQ to associate a particular Service Access Point (SAP) with the stream.
CONFIGURATION
By default, the rge driver performs auto-negotiation to select the link speed and mode. Link speed and mode can be any one of the follow-
ing:
o 1000 Mbps, full-duplex
o 100 Mbps, full-duplex
o 100 Mbps, half-duplex
o 10 Mbps, full-duplex
o 10 Mbps, half-duplex
Alternatively, you can set the capabilities advertised by the rge device using ndd(1M). The driver supports a number of parameters whose
names begin with adv_. Each of these parameters contains a boolean value that determines if the device advertises that mode of operation.
The adv_pause_cap indicates if half/full duplex pause is advertised to link partner. You can set adv_asym_pause_cap to advertise to the
link partner that asymmetric pause is desired.
For example, to prevent the device 'rge2' from advertising gigabit capabilities, enter (as super-user):
# ndd -set /dev/rge2 adv_1000fdx_cap 0
All capabilities default to enabled. Note that changing any capability parameter causes the link to go down while the link partners renego-
tiate the link speed/duplex using the newly changed capabilities.
You can find the current parameter settings by using ndd -get. In addition, the driver exports the current state, speed, duplex setting,
and working mode of the link via ndd parameters (these are read only and may not be changed). For example, to check link state of device
rge0:
# ndd -get /dev/rge0 link_status
1
# ndd -get /dev/rge0 link_speed
100
# ndd -get /dev/rge0 link_duplex
2
The output above indicates that the link is up and running at 100Mbps full-duplex. In addition, the driver exports its working mode by
loop_mode. If it is set to 0, the loopback mode is disabled.
FILES
/dev/rge* Character special device.
/kernel/drv/rge 32-bit x86 rge driver binary.
/kernel/drv/amd64/rge 64-bit x86 rge driver binary.
/kernel/drv/sparcv9/rge SPARC rge driver binary.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC, x86 |
+-----------------------------+-----------------------------+
SEE ALSO
dladm(1M), attributes(5), streamio(7I), dlpi(7P)
Writing Device Drivers
STREAMS Programming Guide
Network Interfaces Programmer's Guide
SunOS 5.11 21 Dec 2007 rge(7D)