# vxdisk list
DEVICE TYPE DISK GROUP STATUS
hds9500-alua0_278 auto:cdsdisk - - online
hds9500-alua0_279 auto:cdsdisk - - online
hds9500-alua0_280 auto:sliced - - online
hds9500-alua0_281 auto:none - - online invalid
hds9500-alua0_282 auto:none - - online invalid
hds9500-alua0_283 auto:none - - online invalid
This is a "vxdisk list" which shows me all my disks attached to the system and what disk are used by VxVM (online) and the ones that are free (online invalid)
Anyone know how to do get such an output using zfs specific commands ?
The fact a disk is not used by VxVM (resp ZFS) doesn't necessarily mean it is free.
It might be used by something else. Moreover, the reality might be more subtle than the disk level approach you are expecting.
There might be primary and extended partitions (x86), there will likely be slices (x86 & SPARC) and any of them might be used by some volume manager (SVM, VxVM, ZFS, ASM) or directly contain a file system (UFS, FAT, SamFS, ...) or something else, especially if the device is shared/used by a different operating system.
You might run something like this to explore all of the potential partitions/slices:
Now this doesnt look right to me. All of these disks are 100Gb LUNS so total zpool size is 300Gb.
Am I right in saying that this zpool consists of two disks plus one more disk that is 6 way mirrored?
So a bit pointless because only one of the three is mirrored (and 6 way is a bit of overkill... (3 Replies)
Hi
I have a problem with size on zfs filesystem on FreeBSD 9.2-RELEASE-p3.
When I do this:
free01# df -Th
Filesystem Type Size Used Avail Capacity Mounted on
/dev/ufs/FreeNASdde ufs 926M 826M 26M 97% /
devfs devfs ... (1 Reply)
So,
We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup
FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the... (4 Replies)
Hello experts,
I have a solaris 10 (SunOS 5.10 Generic_148888-05 sun4u sparc SUNW,SPARC-Enterprise) that by mistake I added a second san space of 700g to the pool. the whole pool is now 1.2T and, I need to take the space away from the pool and, make the pool 700g total. this is live oracle... (7 Replies)
Hi All,
I am getting zpool corrupted message under zpool status command.What could be the reason for this.I had observed this zpool was full this morning after this i am seeing this error.
$PWD>zpool status -xv R5
pool: R5
state: DEGRADED
status: One or more devices has experienced... (0 Replies)
Hi,
I have an X86pc with Solaris 10 and ZFS system. It has 8 similar disks.
I need help in creating some zpools and changing the mount-point of a slice.
Currently, the zpool in my system is like this:
root@abcxxx>zpool status
pool: rpool
state: ONLINE
scrub: none requested... (4 Replies)
hi ...
i have added a physical disk to the pool with
""zpool add <poolname> diskname"""... after that i realized that i have to mirror it instead..then i tried to take that disk out of the pool but i m not able to do that..
i have gone through many unix help sites , nothing worked ,
so please... (6 Replies)
hi there, i'd like to know what exactly zpool's iostat (-v) output measure, especially the writes. Is it only the writes to the ZIL or all writes (including commmits) to the disks? if anyone knows, that'd be helpful roti (1 Reply)
I had a pool which was exported and due to some issues on my SAN i was never able to import it again. Can anyone tell me how can i destroy the exported pool to free up the LUN. I tried to create a new pool on the same pool but it gives me following error
# zpool create emcpool4 emcpower0c... (0 Replies)
hi i have created a pool using zpool command for my /dev/dsk/c1d0s3 disk.
The poolname is qwertyuiopasdfghjklmnbvcxzzxcvbnmasdfghjklqwertyuiopoiuytrewqasdfghjklkjhgfdsazxcvbnmmnbnbcxczxzassd
ddddvfhfghgjjgjhgkhkljfjlhohihiuyuioyguioyguiowyuiogwyuigwrigywuigyguiyuiogyugiyguioyuyguiowygiuygui... (1 Reply)