We have an M5000 with one domain running Sun Cluster on it. We would like to split the domain into two domains. One with the existing Sun Cluster and one with a fresh install. We have 2 CPU Boards (8 CPU) / 4 Mem Boards (64 gb memory) and 2 IOU as well as 4 disks
Is it possible to have such a configuration?
Domain 0
5 CPU
40 GB Memory
1 IO Board
2 Disks
Domain 1
3 CPU
24 GB Memory
1 IO Board
2 Disks
What are the limitations in configuring domains? What is the relationship between memory and cpu?
Is there anything I need to be aware of if I want to split the existing domain?
How would I split the domain without risking to lose the Sun Cluster OS.
i had to do it with a full assembled M5000 and i did quad XSB on all boards back then to have a larger and a smaller domain. so i think you have to try your configuration on your own
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Hi,
This Sun M5000 currently has a single domain (0) created. Solaris 10 is installed on this domain with some local zones. Now we need to add a secondary hardware domain (1) to this M5000. My question: Can we keep the current OS settings on domain 0 when adding the secondary domain 1?
Thank... (5 Replies)
Hi,
This Sun M5000 currently has a single domain (0) created. Solaris 10 is installed on this domain with some local zones. Now we need to add a secondary hardware domain (1) to this M5000. My question: Can we keep the current OS settings on domain 0 when adding the secondary domain 1?
... (0 Replies)
Hi i 've a M5000 running 2 domains in my Lab with following hardconf
SPARC Enterprise M5000; Memory_Size:128 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B... (3 Replies)
Hi,
I 've a fully loaded M5000 which i would like to partition in 4 domains but i have a concern that since we have only 4 internal disks how can we partition the box in for domains with 2 disks ( mirrored ) in each domain. Should i go ahead with 1 Lun from SAN and 1 internal disk for each of 4... (3 Replies)
Dear Expert,
i have linux box that is running in the windows domain, BUT did not being a member of the domain. as I am not the System Administrator so I have no control on the server in the network, such as modify dns entry , add the linux box in AD and domain record and so on that relevant.
... (2 Replies)
I want to look into a folder to see if there are any folders within it. If there are, I need to check inside each folder to see if it contains a .pdf file
So
If /myserver/myfolder/
contains a folder AND that folder conatins a .pdf file
do X
Else
do Z
I may have multiple folders and... (4 Replies)