Login or Register to Ask a Question and Join Our Community


Solaris

Traffic routing through wrong interface

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Traffic routing through wrong interface
# 1  
Old 11-27-2012
Traffic routing through wrong interface
Solaris-9 server is having one primary IP 10.41.161.14 on qfe0 and 10.41.116.0 on qfe3:1. Traffic is going through virtual interface instead of physical interface. How should I force traffic to go with primary interface.
Code:
root@smtsrvn01:/# netstat -nr
Routing Table: IPv4
  Destination           Gateway           Flags  Ref   Use   Interface
-------------------- -------------------- ----- ----- ------ ---------
10.41.116.0          10.41.116.7          U         1  11219  qfe3:1
10.41.116.0          10.41.116.9          U         1      0  qfe3:2
10.41.116.0          10.41.116.11         U         1      0  qfe3:3
10.41.116.0          10.41.116.14         U         1      0  qfe3:4
10.41.116.0          10.41.116.2          U         1      0  qfe3
10.41.160.0          10.41.161.14         U         1 132730  qfe0
224.0.0.0            10.41.116.2          U         1      0  qfe3
default              10.41.119.254        UG        1 865873
127.0.0.1            127.0.0.1            UH       18250500212  lo0

Moderator's Comments:
Mod Comment edit by bakunin: changed PHP-tags to CODE-tags. Please use these for code and data, PHP only for PHP-code. Thank you.
Last edited by bakunin; 11-27-2012 at 08:39 PM..
# 2  
Old 11-27-2012
Solaris is not my strong side, but some things are common in every OS which adheres to the standards. In this case that means: routing tables are read from top to bottom and the first matching rule is used. You have several interfaces all pointing to net "10.41.116.0". Because one of them (10.41.116.7) is mentioned first in this list of rules it is used. Would any other interface be on top there than this would be used instead.

I hope this helps.

bakunin
This User Gave Thanks to bakunin For This Post:
solaris_1977
# 3  
Old 11-28-2012
Thanks bakunin.
You are correct. After deleting virtual IP route, it worked fine.
Thanks
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. IP Networking

Packet going out of wrong interface due to OS automatically added cache route with lower metric

RHEL 7.0, IPV6 Scenario: I have routed specific network using network scripts. 1. "ip -6 route show" shows that route has been added. ( with metric 1024) 2. Ping of the specific IP through that route is successful. 3. Now after few days, for some reason, we see that cache route appears for... (3 Replies)
Discussion started by: msr1981
3 Replies

2. IP Networking

Port based multi interface routing

Hello, I wanted to setup routing certain traffic (http/s) out via a second (faster) interface, like described in the following docs (may not post urls): linux-ip.net /html/adv-multi-internet.html thegeekstuff.com /2014/08/add-route-ip-command/ I already had this working years ago on... (0 Replies)
Discussion started by: hyphan
0 Replies

3. Proxy Server

ISP VPS, routing traffic

Hi guys I need to setup server/router in my firm. We got from our ISP dedicated server in their data center. It has a static IP and it servers as replacement for out DSL connection. I configured our internal server to be border gateway and to connects to data center. "Remote" admin installed... (0 Replies)
Discussion started by: solaris_user
0 Replies

4. Solaris

Network interface showing wrong configuratoin

on both of my T2000 I am seeing same values of 100Mbps for e1000g0 ethernet port. i know all four ethernet ports on T2000 are gigabit ports so why is my first link showing as 100Mbps and how can i correct it? # dladm show-dev e1000g0 link: up speed: 100 Mbps ... (1 Reply)
Discussion started by: aliyesami
1 Replies

5. IP Networking

Splitting eth0 traffic into two virtual interface

Hello everybody, I have been reading many posts about this topic but I have no figure out how to solve it. I need to split the traffic incoming on eth0 on two other interfaces (for instance one receiving on port 80 and the others on the other interface). I cannot understand how to do that.... (2 Replies)
Discussion started by: nicandro
2 Replies

6. IP Networking

Routing traffic problem between 3G and Office Lan Network

Hi, I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't... (0 Replies)
Discussion started by: jao_madn
0 Replies

7. SCO

Change SCO - GUI or Desktop interface to DOS based interface

Hi all I have installed a demo version of SCO OpenServer 5.0.2, I finally found it is Desktop Interface, I would like to know how to change its interface to dos based interface? If you have any ideas, please tell me then. Thank you (2 Replies)
Discussion started by: TinhNhi
2 Replies

8. IP Networking

redirect routing on non-default interface

Hello list membes I have a linux running firewall/router machine, connecting LAN to the internet with two interfaces (no load balancing or other connections). One is a fast connection with dynamic IP (ADSL) which is the default route, the other is a static IP (T3) connection (used for mail sever... (4 Replies)
Discussion started by: docawk
4 Replies

9. IP Networking

Routing Network Traffic With Mandrake

I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"... (1 Reply)
Discussion started by: Deuce
1 Replies
Login or Register to Ask a Question