Add new EML 103e Tape Library in SUN Solaris Host to implement HP DP

10 More Discussions You Might Find Interesting

1. Solaris

Install ext DLT Sun Tape drive on V445 Solaris 10

I have a SunFire V445 running Solaris 10 and am adding a Sun DLT tape drive. From the OK prompt the probe-scsi-all does see the drive and it is the proper target of 4. When I do the boot -- -r it does build the /dev/rmt directories correctly and the links to /devices appear correct as well. When I...

2. UNIX for Advanced & Expert Users

NDMP To Backup a Disk Array to HP B6200, EML 103e Tape Library

Hi All, Seeking information on the following and perhaps a bit of insight and opinions: I would like to look into using NDMP to backup a disk array using NetBackup 7.5 to HP B6200 StoreOnce Backup System (i.e. Virtual Tape Library) as well as physical tape library. Does anyone think...

3. Solaris

Add FC Tape to Solaris 10

Hello I'm pretty new in Solaris 10 and we now have to add an FC-based library to the Solaris. As far as I am informed, we have restart the Sun with the command "boot-r", to detect new devices, right? Then the library should be found automatically? How can I check if the library has been...

4. Emergency UNIX and Linux Support

C4 scsci Tape library not detectable after lustarter patching on solaris 10 u4

Hi All, We have patched our solaris 10 u4 server with lustarter patch in order to get it prepared for solaris live upgrade.The patch installation went pretty fine and we did reboot the server after patching.But after patching we have noticed O.S is not able to detect tape library.Not sure what...

5. Solaris

Solaris 10 and DELL TL-2000 Tape Library with ISCSI

Hello, i am trying to get following configuration up running, but get no access to the library roboter. Server: SunOS 5.10 Generic_138889-03 i86pc i386 i86pc DELL TL-2000: 1 Tape: IBM ULT3580-HH4 and Robot: 3573-TL, connected via ISCSI Bridge (build into the TL) ...

6. Solaris

configure tape drive to sun solaris 10

Hi everyone. Im new to Sun Solaris or the Unix environment. My only background is the DOS command in windows and a little bit of c++ programming. I always worked with troubleshooting hardware and software issues with windows. Now that I need to configure tape drives using sun solaris, I had...

7. Solaris

How to Implement NFS Security in Sun Solaris 9

How to implement NFS Security in server where filesystem is configured as NFS & AutoFS? Any special patch need to be applied? What are the procedures?

8. Solaris

Configuration issue with Tape Library in Solaris 10

Env: Server : Sparc Ultra-80 OS: Solaris 10 Direct SCSI connection to Library. Terminator connected at the Tape End. Problem: Unable to see any device file related to Robotic /dev/rsst0. Unable to see any device file /dev/rmt. ------------ Messages while the machine boots sst0: No...

9. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get...

10. UNIX for Dummies Questions & Answers

ATL L200 Tape Library and Solaris

I picked up this library but I cannot get the device to actuate. How do I make this work with Solaris 7?

LEARN ABOUT DEBIAN

suninstall

suninstall(1M)						  System Administration Commands					    suninstall(1M)

NAME

       suninstall - install the Solaris operating system

SYNOPSIS

       suninstall

DESCRIPTION

       install-solaris(1M) is now the preferred command for starting and restarting the Solaris Installation program. It should be used instead of
       suninstall. suninstall is symbolically linked to install-solaris.

       suninstall is a forms-based and graphical subsystem for installing the operating system.

       suninstall exists only on the Solaris installation media (CD or DVD) and should only be invoked from there. Refer to the Solaris 10 Instal-
       lation Guide: Basic Installations for more details.

       suninstall allows installation of the operating system onto any standalone system. suninstall loads the software available on the installa-
       tion media. Refer to the Solaris 10 Installation Guide: Basic Installations for disk space requirements.

USAGE

       Refer to the Solaris 10 Installation Guide: Basic Installations for more information on the various menus and selections.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom (Solaris  instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       pkginfo(1), install(1M), install-solaris(1M), pkgadd(1M), attributes(5)

       Solaris 10 Installation Guide: Basic Installations

NOTES

       It is advisable to exit suninstall by means of the exit options in the suninstall menus.

SunOS 5.10							    9 Sep 2004							    suninstall(1M)

Solaris