We had a network problem a couple of days before that caused 1 interface to down and up. But today I have noticed that our date is wrong, our system have 4 servers and the other 3 are OK.
I used <date> command, the result is:
I have tried set date to be the same as other with this command:
and received:
Can anyone help me on this
---------- Post updated at 11:02 AM ---------- Previous update was at 09:44 AM ----------
Hi DukeNuke2,
This is the result:
I'm looking forward to hearing from you
---------- Post updated 10-10-12 at 08:36 AM ---------- Previous update was 10-09-12 at 01:57 PM ----------
I have just reboot the server and there's nothing new. I have just run into this prompt:
"Time-of-Date Chip had incorrect date"
Please take a look and help me on this, ntp problem is really a serious one.
Hi,
I have two ntp servers in my cluster and I want all the nodes in my cluster to sync with either of the ntp servers or just one. Unfortunately it keep rotating the sync, between my ntp server 1, ntp server 2 and local. Is there anyway I can change the sync to avoid local?
# ntpq -p
... (3 Replies)
Hi folks, I have developed a Linux server for my customer. After migrating the server to my customer site, I was trying to sync its time to the NTP time servers at my customer site.
Below is the ntp.conf:
% vi /etc/ntp.conf
# Permit time synchronization with our time source, but do not
# permit... (2 Replies)
hi guys
I have several Red Hat 5.7(7) all of them sync time with two NTP Servers based on Windows but the issue is I configure the NTP service, I start the ntp service and use ntpdate -u to set the time the first time
This is what I do
1. Configure /etc/ntp.conf
restrict default kod... (2 Replies)
Hi,
I have 4 machines and all are NTP configured with same ntp.conf file. But 3 machines are in sync with Time server and 4th machine is not contacting & sync with the NTP server. Please see the below details.
# service ntpd stop
Stopping ntpd: ... (0 Replies)
All,
I need to write a script which can determine if my NTP client is X second off from the NTPD server time. I am looking for a crafty oneliner to calculate the time difference? (3 Replies)
Ok, I have 4 production systems. There is one NTP server for all four systems. In each system there is one Solaris 10 box that points to that NTP server. All of the other machines in the system point to the Solaris 10 machine to get their time sync.
All four Solaris 10 machines have essentially... (2 Replies)
Hello all,
What would be the most convienint and proper way on syncing up the time and date on Solaris 8 servers with an NTP server?
Any help would be appreciated. Thanks (2 Replies)
Hi folks,
The server time is no tgetiing synched up with the NTP server.
I tried ntpdate -u <ipadress> this is not working. please help out.
regards,
Sag. (7 Replies)
All,
How do you set a Solaris 9 server which received ntp updates from a ntp server to broadcast them on a local subnet. I have created a /etc/inet/ntp.conf file to receive the updates from a server on network and need to make this server become like a ntp relay from the main server.
Any... (1 Reply)