~#hello -all,
Many UNIX/Linux/BSD/etc books warn about turn off the puter without a proper shutdown. This can damage files which are open at that moment. Seems logical to me. My question is.. does the system warn you when there are damaged files when the system is up again? I had a power failure... (7 Replies)
Can anyone tell me how to start pc automatically when power comes,
here I just want to start server automatically, on boot, my server starts automatically because I have written some startup commands in rc.local file but if power fails, then how can I boot automatically (2 Replies)
Hi all,
I have a server SUN FUJITSU in solaris 10 ; result of uname -a is :
SunOS MOBD1 5.10 Generic_118833-03 sun4us sparc FJSV,GPUZC-M
I have configured the eeprom to auto-boot as usual and this automatic reboot does not work in case of power failure. I must type "boot" on the prompt "ok"... (5 Replies)
Dear Frnz,
i have a ultra 45 with solaris 10 installed.
I face a weird issue in that.
once the machine goes to power save mode i am not able to bring the machine back by hitting the keys in keyboard or moving the mouse.
I am able to rsh the machine from another machine.
To bring the... (1 Reply)
We have a problem on a Sparc Ultra 5 box when installing solaris.
We boot from the CD-ROM then go through the install procedure adding IP address, domain, routing details, hard disk layout etc.. The problem arises when asked for the 2nd CD at this point you do get the option to "skip"... (1 Reply)
cvcd(1M) System Administration Commands cvcd(1M)NAME
cvcd - virtual console daemon
SYNOPSIS
/platform/platform_name/cvcd
DESCRIPTION
The virtual console daemon, cvcd, is a server process that supports the network console provided on some platforms. The cvcd daemon accepts
network console connections from a remote host (only one host at any given time). Console input is read from this connection and forwarded
to cvc(7D) by way of cvcredir(7D).
Similarly, console output is read from cvcredir(7D) and forwarded across the network console connection. If cvcd dies, console traffic is
automatically rerouted through an internal hardware interface.
The cvcd daemon normally starts at system boot time. Each domain supports only one cvcd process at a time.
Caution: On Sun Enterprise 10000 domains, cvcd uses a configuration file (/etc/ssphostname) to determine the name of the host from
which network console connections are allowed. If the remote console host is renamed, you must edit the configuration file
to reflect that change.
OPERANDS
The following operands are supported:
platform_name The official Sun platform name used in packaging and code. For example, for Sun Fire 15K servers, the platform_name
would be SUNW,Sun-Fire-15000.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |Sun Enterprise 10000 |
| |servers, Sun Fire High-End |
| |Systems |
+-----------------------------+-----------------------------+
|Availability |SUNWcvc.u |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), svcadm(1M), services(4), attributes(5), smf(5), cvc(7D), cvcredir(7D)
Sun Enterprise 10000 SSP Reference Manual
System Management Services (SMS) Reference Manual
NOTES
The cvcd service is managed by the service management facility, smf(5), under the service identifier:
svc:/system/cvc
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.10 11 Aug 2004 cvcd(1M)