When I ping from my laptop to the sunblade ... I get the following output, it seems that the ping is fine....
I have to put the ip address and the port detail in the Telnet client. If I leave the port empty the connections fails. If I put 23, it still fails...
---------- Post updated at 10:41 PM ---------- Previous update was at 10:20 PM ----------
I tried the telnet and I get the following error
I dont know where it has picked up the port 23 details.
---------- Post updated at 10:44 PM ---------- Previous update was at 10:41 PM ----------
As you understand that I am pretty new to all this, can you please confirm what you mean by "make sure that the IP addresses chosen are on the same IP network." ?
Last edited by methyl; 05-15-2012 at 07:21 PM..
Reason: please use code tags
I dont know where it has picked up the port 23 details.
Port 23 is the standard default port for telnet .
Do you now have a Hub or a Switch in the circuit?
Are your chosen IP addresses on the same IP network? It would be quicker to post the IP addresses and netmask values than to give an online course.
If you are familiar with arp -a quick check that the MAC address which is replying to ping is what you expect.
Corona688 makes a valid and very important point. The ping times for a locally connected computer should be near to zero or zero. Please pursue my suggestion to check that the computer which is replying is the correct computer.
Hello everybody,
I need to connect a laptop 2.5 SATA hard drive to a Desktop board (which uses 3.5' SATA hard drives). I've tried the connectors and they fit excellent in the 2.5 SATA connectors.
The problem is that the laptop hard drive uses 5v and the PC's power source sends 12v. So, my... (4 Replies)
I am having trouble connecting my 4TB G-Raid Hard drive to my Compaq Hp laptop can anyone tell me how or what I need in order to connect the 4T and getting it working. (10 Replies)
Hi to all,
I have the problem that a laptops with windows XP cannot startup even in safe mode nor using last good known configuration. I have a Ubuntu 10.10 Live CD and booting from it I can read the Hard Drive.
I need to do a backup the Hard Drive from XP laptop and I want to connect this... (5 Replies)
Greetings,
I was in the mood of upgrading my sunblade100 in my bedroom, since I recuperated some RAM from intel servers, and found myself with what seems to not work (I was hoping to pass from 256Mb to 2GB... and then upgrading to solaris 10...)
after this failure I tried with just one 512 MB,... (2 Replies)
I recently bought a sunblade 100 for $150 from a guy that posted it on craigslist. I'm trying to learn Solaris 10. Prior to giving me the system he had Ubuntu installed. He removed it for before giving it to me. I basically have a hard disk that has nothing installed in it. I tried installing... (6 Replies)
Question,
when adding memory to a SunBlade 100, are you required to add it in matched pairs? My current box has 2 x 256mb sticks of PC-133 ram. I tried adding 1 512mb sticks and the system failed to come up. I saw at Sunsolve that you can mix and match different sized memory. (5 Replies)
Hi,
I have been using a computer to keep track of inventory for my business. I am pretty sure it runs on Unix. In the back of the computer there is some sort of PCI card that has about 8 RJ-11 ports on it. I use that card to connect the Unix system to my 3 VT-220 terminals. I use a simple 6... (1 Reply)
I have tried to install the Debian distribution for SPARC processor, but is a pian in the neck trying to boot from cdrom or floppy.
Please can somebody to help me to know the easiest way to boot and install Debian on a SUNBLADE 100 system? or wich is the best way to installed on this system, I... (2 Replies)
hii alll
i have a problem with my sunblade100. when i switch on, no display comes but if i ping from a remote machine its pinging,but iam not able to telent to that sun server,what can be the problem,how can i sort ot this issue
2 thing in usb iam not able to use STOP N (to clear the... (3 Replies)
I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system.
thanks (3 Replies)