Solaris

Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.

Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.

Question:
Should I remove the hardware raid on c1t2d0 first?

My purpose using veritas volume manager is to ease of increase the disk size when it required. If to use hardware raid, once partition and disk is used on that partition, it will not that easy to expand size. Please correct me if my understand is wrong and do advice me for better approach.

Thank you.
# raidctl
Controller: 1
Volume:c1t0d0
Volume:c1t2d0
Disk: 0.0.0
Disk: 0.1.0
Disk: 0.2.0
Disk: 0.3.0

# raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t0d0 136.6G N/A OPTIMAL OFF RAID1
0.0.0 136.6G GOOD
0.1.0 136.6G GOOD
# raidctl -l c1t2d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c1t2d0 136.6G N/A OPTIMAL OFF RAID1
0.2.0 136.6G GOOD
0.3.0 136.6G GOOD