I recently patched my Solaris 10 box and found out that few of the apps are not working. Fortunately, I had detached the mirroring prior to patching, so I just booted into my secondary disk [which was detached prior to patching] and found that my apps are working....
The problem is this was way back in last month....see below :
df -h has /dev/md/dsk/d5 mounted on /usr1
My concern is whatever the work that I had done for the past 40 days on /usr1 will vanish if I do :
I have created the mirroring succcessfully with root as well as swap with unpatched disk as primary disk and patched disk as secondary and attached the mirrirs...
The only problem that I am facing is with the md d5 ?
c0t0d0 is the patched disk.
c0t1d0 is unpatched disk and I have booted through this last month.
Currently metastat -p output is
/dev/md/dsk/d601 12G 3.9G 7.8G 34% /u01
I forgot to make changes in vfstab for md device d5 when I backout the patches, so df -h has /dev/md entry with metastat -p output showing that the mirror has been cleared for d5. Hope that it does makes sense now !
Dear All,
I face some errors in SVM.Need help.
Actually couple of days ago i got a call from one of the customer mentioning that one of the sub-mirror was in Need maintance state. So we replaced that disk. After Replacing the disk it comes back to "Okay" State.
But the Error are... (3 Replies)
Hello
I want to ask that how to mount and run fsck in SVM disk.In my scenario if i have to disks c0t0d0 and c0t1d0 these two disks are in Mirroring (raid1) if i want to run fsck on the disks than below are the right steps?
ok boot cdrom -s
mount /dev/dsk/c0t0d0s0 /a
cd /a
fsck... (3 Replies)
How to list out multiple Disk sets in SVM
# metaset -s <disksetname> --- This will list out only one diskset
but I need a list of disk sets configured for the node.
Is there any command,please let me know ...
Thanks in advance. (1 Reply)
HI,
I added by error to a submirror some disks :
metattach d53 c2t90d0s0 c2t90d1s0 ... instead of doing a stripe by disk (like that) :
metattach d53 c2t90d0s0
metattach d53 c2t90d1s0
..
then, I did a growfs -M to expand FS and the size isn't correct.
I tried to launch a... (1 Reply)
i have taken two separate disk
A and B
created 4 slices in each
A b
s4 s4
s5 s5
s6 s6
s7 s7
took slices s4 of A and slice s6 0f B ---created a meta device d0
took slices s4 of B and slice s6 0f A---created a meta device d1
created main mirror d2 using d0... (1 Reply)
I am trying to set up a new server. It has 8 HD's in it. I am using 2 for the system disk. IE set one up mirror to the other. I am using the other 6 as data disks. For those I want to concat 3 together, mirror to the other 3 (also concated together of course) and then make various soft... (7 Replies)
Really sorry for the long posting. But i would really want to clear all the doubts.
I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main).
Creating state database replica:
metadb -a -c3 -f c0t0d0s7
... (3 Replies)
gurus,
i have configured the LUN's in solaris 10.after labeled the disk,i have added the disk into one of the soft partition using metattach d0 c5t1000d10s6.actully before that i should confiure the powermt and than i should have add metattch d0 emcpowerc2.i forget to do that and increased... (0 Replies)
Hi All,
I have to remove the disk from SVM.
Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion.
Thanks in anticipation! (10 Replies)