SVM Creation

10 More Discussions You Might Find Interesting

1. Solaris

SVM ISSUE...

Dear All, I face some errors in SVM.Need help. Actually couple of days ago i got a call from one of the customer mentioning that one of the sub-mirror was in Need maintance state. So we replaced that disk. After Replacing the disk it comes back to "Okay" State. But the Error are...

2. Solaris

Fsck with SVM

Hello I want to ask that how to mount and run fsck in SVM disk.In my scenario if i have to disks c0t0d0 and c0t1d0 these two disks are in Mirroring (raid1) if i want to run fsck on the disks than below are the right steps? ok boot cdrom -s mount /dev/dsk/c0t0d0s0 /a cd /a fsck...

3. UNIX for Advanced & Expert Users

What is interlace value in SVM?

Hi All, I want to know what is the Interlace value in SVM and what is the need of this ? regards, prashant

4. UNIX for Advanced & Expert Users

SVM

How to list out multiple Disk sets in SVM # metaset -s <disksetname> --- This will list out only one diskset but I need a list of disk sets configured for the node. Is there any command,please let me know ... Thanks in advance.

5. Solaris

Problem with SVM

HI, I added by error to a submirror some disks : metattach d53 c2t90d0s0 c2t90d1s0 ... instead of doing a stripe by disk (like that) : metattach d53 c2t90d0s0 metattach d53 c2t90d1s0 .. then, I did a growfs -M to expand FS and the size isn't correct. I tried to launch a...

6. UNIX for Dummies Questions & Answers

SVM doubt

i have taken two separate disk A and B created 4 slices in each A b s4 s4 s5 s5 s6 s6 s7 s7 took slices s4 of A and slice s6 0f B ---created a meta device d0 took slices s4 of B and slice s6 0f A---created a meta device d1 created main mirror d2 using d0...

7. Solaris

SVM question

I am trying to set up a new server. It has 8 HD's in it. I am using 2 for the system disk. IE set one up mirror to the other. I am using the other 6 as data disks. For those I want to concat 3 together, mirror to the other 3 (also concated together of course) and then make various soft...

8. Solaris

SVM, mirroring

Really sorry for the long posting. But i would really want to clear all the doubts. I have 2 disk c0t0d0 & c0t1d0, i wanted to mirror c0t1d0 (mirror) to c0t0d0 (main). Creating state database replica: metadb -a -c3 -f c0t0d0s7 ...

9. Solaris

Change the name in SVM

gurus, i have configured the LUN's in solaris 10.after labeled the disk,i have added the disk into one of the soft partition using metattach d0 c5t1000d10s6.actully before that i should confiure the powermt and than i should have add metattch d0 emcpowerc2.i forget to do that and increased...

10. Solaris

Removing Disk from SVM

Hi All, I have to remove the disk from SVM. Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion. Thanks in anticipation!

LEARN ABOUT DEBIAN

svm-landscape

SVM-LANDSCAPE(1)						   User Commands						  SVM-LANDSCAPE(1)

NAME

       svm-landscape - Command line interface to svm-landscape in mlpy (version 2.2.0)

SYNOPSIS

       svm-landscape [options]

OPTIONS

       -h, --help
	      show this help message and exit

       -d FILE, --data=FILE
	      data - required

       -s, --standardize
	      standardize data

       -n, --normalize
	      normalize data

       -k K   k for k-fold cross validation

       -c SETS PAIRS
	      sets and pairs for monte carlo cross validation

       -S, --stratified
	      for stratified cv

       -K KERNEL, --kernel=KERNEL
	      kernel: 'linear', 'gaussian', 'polynomial', 'tr' [default linear]

       -P KPARAMETER, --kparameter=KPARAMETER
	      kernel parameter (two sigma squared) for gaussian and polynomial kernels [default 0.1]

       -o COST, --cost=COST
	      for cost-sensitive classification [-1.0, 1.0] [default 0.0]

       -m MIN, --min=MIN
	      min value for regularization parameter [default -5]

       -M MAX, --max=MAX
	      max value for regularization parameter [default 5]

       -p STEPS, --steps=STEPS
	      steps for regularization parameter [default 11]

       -e SCALE, --scale=SCALE
	      scale for regularization parameter: 'lin' or 'log' [default log]

       -l, --lists
	      Canberra distance indicator

       -a, --auc
	      Wmw_auc metric computation

mlpy								     July 2010							  SVM-LANDSCAPE(1)

Solaris

SVM Creation

10 More Discussions You Might Find Interesting

1. Solaris

SVM ISSUE...

Discussion started by: sudhansu

2. Solaris

Fsck with SVM

Discussion started by: jhonnybravo

3. UNIX for Advanced & Expert Users

What is interlace value in SVM?

Discussion started by: prashant2507198

4. UNIX for Advanced & Expert Users

SVM

Discussion started by: pramath