Rename soft partition

10 More Discussions You Might Find Interesting

1. Solaris

Extend a soft partition

Hi, I need to extend a soft partition from 20G to 100G. New disk is already added as a meta device. This soft partition is already assigned to a guest LDOM. Can someone let me know the steps to increase soft partition so guest LDOM can recognize the new space. Thanks

2. Red Hat

Shrink LVM partition & create new Linux Primary partition

Hello All, I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows, /boot - Linux Partition & another is LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc). Here my requirement is to take out 1GB of space from LVM ( Any logical...

3. Filesystems, Disks and Memory

Ask concept soft partition vs hard partition

Hi Experts I would like to know different between soft partition concept and hard partition concept on solaris. Here is little explanation between soft partition concept and hard partition concept on solaris. Soft Partition: 1TB total space available in storage in all mapped to the OS to...

4. Solaris

Partition overlaps another partition while creating new parition in solaris

hi all while formatting hard disk i am getting following error. Partition 1 ends at 266338338 It must be between 34 and 143374704. label error: EFI Labels do not support overlapping partitions Partition 8 overlaps partition 1. Warning: error writing EFI. Label failed. I have formatted the...

5. SuSE

Rename partition c0d0p1

Hi guys, need some help with a simple renaming task under SUSE. I'm trying to use a custom name for a disk device under OpenSUSE. I have a device named "c0d0" which contains a partition "c0d0p1" /dev/cciss/c0d0p1 is the name of the file as well as the name reported by "fdisk". I'd like...

6. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe...

7. Solaris

Need advice on soft partition

Hello All, Am trying to expand the soft partition which is in mirror. Am getting following error. Whether is it possible? or i am doing wrongly. Please assist. bash-2.05# metastat d100 d100: Mirror Submirror 0: d102 State: Okay Submirror 1: d105 State: Okay ...

8. Solaris

Solaris Filesystem - rename the partition

Hi all i got this filesystem Filesystem size used avail capacity Mounted on /dev/dsk/c0t600A0B80001F350A000033404A5D29D9d0s2 492G 64M 487G 1% /u10 How do i change the name for /dev/dsk/c0t600A0B80001F350A000033404A5D29D9d0s2 to the...

9. UNIX for Dummies Questions & Answers

I've created a partition with GNU Parted, how do I mount the partition?

I've created a partition with GNU Parted, how do I mount the partition? The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards. Thanks, --Todd

10. UNIX for Dummies Questions & Answers

understanding logical partition, physical partition

hi, 1) is logical partition the same as physical partition except that one is physical and the other is logical? 2) then it must a one to one ratio?

LEARN ABOUT MINIX

repartit

REPARTITION(8)						      System Manager's Manual						    REPARTITION(8)

NAME

       repartition - load a partition table

SYNOPSIS

       repartition device [partition-file]

DESCRIPTION

       Repartition  uploads  a new partition table for the partitions of device.  The table is obtained from the first sector of partition-file if
       given, device otherwise.  Device may refer to the whole drive or a primary partition, depending on whether you want to upload  a  partition
       or a subpartition table.  The partitions will be truncated to fit within the enclosing device like the disk driver does, unless the numbers
       are coming from partition-file.

EXAMPLES

       repartition /dev/hd0
       repartition /dev/hd4 /etc/hd4.table

       Reload the partition table of drive 0 setting /dev/hd[1-4], and the subpartition table of /dev/hd4 setting /dev/hd4[a-d] using a file.  The
       latter may be useful if you need more than the 4 subpartitions a single Minix partition gives you.

DIAGNOSTICS

       The new table is printed on standard output.

FILES

       /dev/hd[0-9]

SEE ALSO

       hd(4), part(8).

BUGS

       The disk must be in use for the changes to stick.  The partition table of an idle disk will be reloaded on the first open.

AUTHOR

       Kees J. Bot (kjb@cs.vu.nl)

																    REPARTITION(8)

Solaris